Polished aluminum finish. Quality 6061-T6 forged aluminum for strength & durability. Designed to exceed OEM specifications, built to resist breakage. Designed to fit OE perch. Image is for reference only, actual product may vary for your application.
Bridgestone has best-in class tires engineered with advanced tire technology for those moments when you need it most. Thats why their engineers are very passionate about researching and developing new tire technologies, including inner tubes. Discover the technologies that fit your performance needs. Bridgestone Ultra Heavy Duty Tubes are designed for the harshest street and off-road applications. Constructed of ultra-heavy duty 4 millimeter thick natural rubber for superior protection against flats. Recommended for the high demands of Enduro, desert, and cross country riding or racing. Tube Specifications: Size: 100/90-19.
KN Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. KN Powersports Oil Filters are TUV product endorsed and TUV factory production monitored. KN cartridge oil filters trap harmful contaminants while the filters construction allows for high oil flow rates. KN Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service intervals. KN Performance Motorcycle Oil Filters are constructed of resin-impregnated cellulose filter media, meaning high flow rate and outstanding filtration. When you push your motorcycle to its limits, take comfort in knowing the KN Performance Oil Filter is keeping up with your engine by allowing greater flow rate. High flow rates and outstanding filtration - traps 99% of harmful contaminants. KN has developed their performance oil filter to optimize efficiency with high end synthetic oils. KN performance oil filters come with a common 17 mm nut, drilled for safety wire, mounted on the filter shell. This makes it possible to change out the oil filter with ease and no special tools. KN also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown. To prevent installation damage KN uses a rolled thread to avoid stripping. Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal. Filter Specifications: Product style: Oil filters. Anti drain back valve: Yes. Bypass valve: Yes. Filter material: High flow premium media. Gasket material: Nitrile rubber. Height: 4.063 inches (103 mm). Outside diameter: 3 inches (76 mm). PSI relief valve: Yes. Removal nut: Yes. Style: Canister. Thread specification: 3/4 In. - 16 UNF. Finish: Black. Removal nut size: 17 mm. Weight: 0.8 pounds (0.36 kg).
No Toil makes some of the best air filters in the industry and their Twin Stage air filter provides your motorcycle or ATV with the best air flow available with industry leading performance and durability to handle even the most extreme conditions. No Toil constructed the Twin Stage air filter with two pore sizes to trap more particles to protect your motorcycle or ATV's engine. A fully open cell structure allows the No Toil Twin Stage air filter to push more air into your intake to boost horsepower and performance. Designed to deliver unmatched durability, the No Toil Twin Stage air filter is constructed to last longer in racing conditions. No Toil makes all of their Twin Stage air filters by hand and uses top quality glue and materials to ensure that each filter will offer all of the quality protection and performance that No Toil is known for. No Toil offers a one year warranty on their Twin Stage air filters so you can buy with confidence.
This is the "Crown Jewel" of the Pro Honda Oils line, their very first full synthetic 4-stroke motorcycle oil. Designed to bring maximum performance to the Pro Honda line of oils. Lower fluid friction than conventional oils. Better oxidation resistance for better high heat performance. Higher film strength under heat and load than a conventional oil. Quicker flow to vital engine parts at low temperature, especially during start up. Maximum power due to less frictional drag from the oil. Tested and approved by Honda R & D, and developed by the same engineers that make oil for the Honda Racing Team. 1 quart.
The original No-Toil Air Filter Oil is a super-tacky, dirt-grabbing, water-resistant filter oil that increases horsepower. It will not wash out with gas, solvents or water alone. But, youll be amazed at how quickly and easily your filter will come completely clean with the highly concentrated No-Toil Air Filter Cleaner (sold separately) and water. The filter will be super tacky and ready for use quickly due to the alcohol carrier. This oil will work on both foam and fabric filters (KN). Super tacky, sticky and amazingly good at stopping dirt. Engineered to not only provide adequate engine protection, but to also focus on performance. Increased airflow due to Micro-Flow Technology, thus providing a horsepower increase by decreasing the resistance of the air travelling through the foam air filter. Easy cleaning in seconds with water and No-Toil Cleaner. Waterproof, will not remove from filter with water alone. Neon dyed to ensure visibility of complete coverage. Biodegradable and non-toxic.
No-Toil Filter Cleaner is a concentrated formula designed to mix with water. No solvents are required to clean No-Toil treated air filters. The cleaner breaks down the waterproofing chemicals of the No-Toil filter oil and rim grease, before completely washing the oil, grease, dust and dirt from the filter. The non-toxic, no-fume, no-odor cleaning solution is skin-safe, and can be used to clean filters in a bucket of water or the kitchen sink. Its biodegradable and non-toxic, so go ahead and dump the dirty solution right down the drain! Concentrated formula designed to mix with water. Requires no solvents to clean No-Toil treated air filters. The No Toil air filter cleaner is a powder formula that easily dissolves in water. Will break down the waterproofing of filter oil and remove all the built-up dirt and grime with it. The air filter cleaner is biodegradable and non-toxic, without fumes or odors, and is safe on the skin making it an environmentally-sound product.
ITP developed the Holeshot GNCC ATV tire to match the rigorous demands of the Grand National Cross Country Championship series. The ITP Holeshot GNCC tires are an advanced design of the original Holeshot tire that have been refined for todays 4-stroke machines. The tread pattern on the rear Holeshot GNCC tires have been designed to be used in any terrain at any time. ITP accomplished this by using deeper lugs that have a split-knob design to give exceptional straight line bite. The shoulder knobs have been specially designed to increase corner control without taking anything away from acceleration grip. The wide spacing of the tread keeps the tire clear of build-up. The beating tires take in the GNCC series is under control with the use of a beefed up 6 ply carcass, but do not expect any extra weight from the Holeshot GNCC tires. The GNCC model of the Holeshot tire line is 2 pounds lighter than the XC model. The sides of the Holeshot GNCC tires have a bright hot patch logo to announce the quality of tires you are running. Note: the ITP Holeshot GNCC tire is sold individually.