Galfer Sintered Brake pads employ a bronze based compound. Excellent feel and performance. Provides instant powerful controlled braking force at any speed or temperature. Consistent performance in wet or dry weather conditions. Long lasting fade resistant power. Does not cause undo wear on rotor. Includes two brake pads, enough for one caliper.
Let your dirt bike or ATV breathe easy with the UNI air box vents. Each air box vent allows additional air to enter in the air box for greater volume. UNI designed the air box vents with foam that can be cleaned and re-oiled.
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces. It protects threads from rust and corrosion and prevents loosening from shock and vibration. Loctite Threadlocker Blue 242 is particularly well-suited for applications on less active substrates such as stainless steel and plated surfaces, where disassembly is required for servicing. Protects threads - prevents rusting of threads. Medium strength - can be removed with hand tools. Locks threads - prevents loosening of metal fasteners caused by vibrations. Recommended for: Use on metal fasteners 1/4" (6 mm) to 3/4" (19 mm) in diameter such as bolts on small engines, swing sets and furniture. Sold individually. Note: NOT recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. NOT recommended for use on plastic parts, particularly thermoplastic materials, where stress cracking of the plastic could result. Technical Specifications: Color: Blue. Temperature: Apply above 50F (10C). Base: Methacrylate ester. Set Time: 10 minutes. Cure Time: 24 hours. Viscosity: 1200 cps @ 20 rpm. Flashpoint: > 200F (93C).
Silkolenes DOT 4 Brake Fluid is suitable for U.K., U.S., European and Japanese motorcycles. Meets DOT 3 and 4 specifications. Suitable for U.K., U.S., European and Japanese machines. Meets requirements of earlier specifications SAE 70RI, SAE J70C and SAE J1703 A to F. Wet boiling point 311F (155C). Initial boiling point exceeds 446F (230C).
COLORS MAY VARY FROM BLUE, RED, OR BLACK ON THE MAGNETIC DRAIN PLUG DUE TO TM DESIGNWORKS PROCESS OF ANODIZING TO PROVIDE THE BEST LOOK AND PROTECTION POSSIBLE. TM Designworks is known in the motorcycle and ATV industry for making products that withstand the rigors of motocross and aggressive off road conditions, and their magnetic drain plug is built to handle the most extreme conditions. Designed as the only motorcycle or ATV specific fit magnetic drain plug on the market, the TM Designworks magnetic drain plug provides an incredibly secure fit so you can ride with confidence. Constructed from 7075 aluminum, the TM Designworks magnetic drain plug is half the weight of stock for a less weight. TM Designworks magnetic drain plugs are anodized for a trick look and protect against corrosion. To enhance performance, TM Desingworks magnetic drain plugs are fitted with a magnet that is 5 times stronger than the average to help pull the metal particles through the oil. The magnetic nose of the TM Designworks drain plug extends up to 1/2" longer to attract the most particles possible ensuring maximum performance. TM Designworks includes a new sealing ring with their magnetic drain plug for a complete and easy installation.
KN Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. KN Powersports Oil Filters are TUV product endorsed and TUV factory production monitored. KN cartridge oil filters trap harmful contaminants while the filters construction allows for high oil flow rates. KN Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service intervals. KN Performance Motorcycle Oil Filters are constructed of resin-impregnated cellulose filter media, meaning high flow rate and outstanding filtration. When you push your motorcycle to its limits, take comfort in knowing the KN Performance Oil Filter is keeping up with your engine by allowing greater flow rate. High flow rates and outstanding filtration - traps 99% of harmful contaminants. KN has developed their performance oil filter to optimize efficiency with high end synthetic oils. KN performance oil filters come with a common 17 mm nut, drilled for safety wire, mounted on the filter shell. This makes it possible to change out the oil filter with ease and no special tools. KN also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown. To prevent installation damage KN uses a rolled thread to avoid stripping. Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal. Filter Specifications: Product style: Oil filters. Anti drain back valve: Yes. Bypass valve: Yes. Filter material: High flow premium media. Gasket material: Nitrile rubber. Height: 4.063 inches (103 mm). Outside diameter: 3 inches (76 mm). PSI relief valve: Yes. Removal nut: Yes. Style: Canister. Thread specification: 3/4 In. - 16 UNF. Finish: Black. Removal nut size: 17 mm. Weight: 0.8 pounds (0.36 kg).