For over 40 years, Alpinestars has produced superior motocross footwear with a paramount commitment to protection, performance and style. The Tech 3 boot represents all of this commitment with an added level of accessibility unmatched by any boot. Ideal for beginners but more than suitable for experts, the Tech 3 offers maximum value and performance at this price point. With its contoured TPU shin plate, reinforced leather rear plate and extended inside and outside guards, the Tech 3 provides some of the best external protection of any boot on the market. The internal shock-absorbing padding protects ankles, while Action leather and front / rear accordion panels allow for a great fitting boot with a low break-in time. As with all of Alpinestars motocross boots, the Tech 3 is CE certified and features replaceable soles and buckles, to ensure maximum performance for many years. The Alpinestars Tech 3 Boots are what you can expect from Alpinestars, high performance and loaded with functional features. The best feature of the Alpinestars Tech 3 Boots is the entry level price. Protection on the Tech 3 Boots are what you can expect from a company like Alpinestars. They have installed contoured shin plate protectors which have been injection-molded with high-modulus polyurethane to provide substantial impact and abrasion resistance. Alpinestars developed a patented "ankle-brace" system for the Tech 3 Boots for great ankle support. This system on the Tech 3 also provides ankle padding to reduce shock. The sole of the Alpinestars Tech 3 Boots provides a rigid platform with the contoured, tempered steel shank that has been over-injected with a dual density rubber to provide tons of grip and give you sure footing. The Tech 3 Boots have extended inside and outside plate guards to provide protection on the side and toe-box areas. The Alpinestars Tech 3 Boots have an internal plastic reinforcement placed on the inside of the boot. This reinforcement provides rigidity to the boot for support. Thick stamped suede covers this up and provides contact grip and heat resistance. The calf plate also helps out with grip, support and side contact on the Tech 3 Boots. Alpinestars uses reinforced leather up the back of the Tech 3 Boots, and their action leather on the upper section for durability. The instep flex-zone has also been stitched for additional support and durability. The Tech 3 Boots will keep you strapped in with the four high impact resistant buckles that feature memory positioning and quick release buckles. Alpinestars uses Velcro brand hook-and-loop attached to the elastic stretch PVC gaiter to seal the top of the boot and prevent water entry. Alpinestars adds plenty of comfort features to the extensive list of protection features. The Tech 3 Boots use a poly-fabric lining in addition to a multi-density EVA foam keeping your feet cozy. If you require a special foot bed Alpinestars accommodates your needs with a removable anatomic foot bed.
"I got the boots about a year ago... at first they were really good... But they are really stiff even after a year.. the buckles are terrible they have to be wet in order for them to snap tight. and the part of the boot that is in contact with the kickstarter when i kick it is really really worn and chewed up... I really wouldnt recommend these boots unless it was for a kid or someone who doesnt ride or race often."
Wear and tear on your motorcycle is part of the game, but it does not have to be expensive thanks to Acerbis and their Swing Arm Rub Plate. The Acerbis rub plate is constructed out of durable rubber and formed to match O.E.M. specifications. Installation is a cinch with this rub plate with the use of the O.E.M. hardware. Made in Italy. Note: Image is for representation only; actual item will vary by fitment.
The Ti-4R Race System is constructed from titanium and is designed for closed course competition ONLY. Pro Circuit constructed the Ti-4R exhaust system with closed course features to maximize its power output potential. Keeping weight to a minimum was the key when designing the Ti-4R system and Pro Circuit achieved that by using high-quality titanium. The non-spark arrested and welded titanium end cap creates a smooth non-restrictive flow, allowing mass amounts of exhaust to escape. Pro Circuits all new RC-4 Resonance Chamber has been added to the head pipe to reduce noise output. Strictly for closed course competition. Non-spark arrested system. Welded titanium end cap (same as Team Pro Circuit). Meets AMA / FIM sound requirements of 94db. Three-piece system which includes silencer, mid pipe and head pipe. Strong billet aluminum mounting bracket. Same exhaust system ran by Team Pro Circuit, Geico Powersports Honda, Troy Lee Designs Honda and Two-Two Motorsports. Note: The RC-4 Resonance Chamber, depending on the year of your bike, might not come with the system.
I bought the pro circuit ti-4r and put it on the day before christmas, got carbureator jetted and i rode on a track once and i had to rebuild my top end, i have a 2009 kx250f, i believe that my motor was dialed in without a pipe and so thats what may have caused it because the sudden change , but the pipe sounds good but for the money its not nearly worth $1,000 after tax. Ill be the 1st to say save ya money for something else
Location: Northern Cambria, PA
AWESOME EXHAUST! NO PROBLEMS!!
Posted October 29, 2012
I did not buy mine from Motosport, I bought mine from a local racer who used it on his practice bike for one practice. But its the same thing. Anyway, I got the pipe when my 2009 kx250f was being totally rebuilt, I have 28 hours on it and nothing is wrong at all I love the sound of a Ti-4R system, mine has the RC-4 header which is awesome. I noticed a gain on bottom end and a little on top. Its a great all around system. I love it and I would buy it again if I ever got that much money again. Haha.