Gain a competitive advantage in the Hustle, equipped with some of Scotts latest Moto goggle technology. Dial in a custom fit with the revolutionary Fit System, and enjoy Scotts newest 3.2-layer foam for supreme comfort. Goggle Features: Scott Fit System for optimized face fit. Three-layer face foam. Durable silicone-lined strap. Lens Technology: Scott TruView single Works lens. 100% UV protection. NoFog anti-fog lens treatment. Scott has always been committed to innovation. The introduction of the Works System once again demonstrates that commitment. The Works System is a complete vision system using the same lens for either the Works Tear-offs or the Works Roll-Off Film System. By utilizing an identical mounting system, the Works System lens allows for hassle-and-tool-free conversion from the Works Roll-Off Film System to the Works Tear-offs System and back. Using the same mounting system as the Works Roll-Off Film System, the Works Tear-off System also has a number of advancements over conventional tear-offs. Factory installed pins result in better tear-off performance and eliminate any variance because of faulty pin installation. For micro-adjustment of tear-off tension, one of the pins is mounted off-center allowing for a slight increase or decrease in tension on the tear-off by a simple twist of the pin. Works Systems really do work.
44 Years - 56 Championships - 1 Brand Every great victory is the accumulation of thousands of ordinary efforts that no one sees or appreciates. Those early mornings and long motos at the practice track, the extra miles on the road bike, the countless hours of conditioning, and the singular focus and commitment to keep advancing. That commitment inspires THOR to continually strive to advance the performance, durability, comfort and style on every piece of moto equipment they produce. With feedback and input from the best riders on earth, THOR creates products that are the result of countless hours of design and testing to ensure they dont just meet your expectations, they exceed them. Thor MX Long and Short socks are constructed of 80% acrylic, 17% polyester and 3% elastan blend for maximum comfort. These over-the-calf socks are ideal for riders who wear knee braces to prevent chafing and irritation. With special low-density panels in the instep, shin, and ankle areas for improved comfort.
FLY Racing proudly introduces the new Trey Canard Replica F2 Carbon helmets. Now you can wear the same helmet as Trey Canard with these replica helmets available in Replica Red / Black or Canard Graphic Blue / White and Orange / Black. The F2 Carbon represents race-inspired lightweight helmet technology for the masses. Based on the same platform as the Formula MX, the F2 Carbon shares many of the technological features as its predecessor, yet still carves out its own unique FLY Racing style and identity. SNELL 2010, DOT (USA) Approved - meets and exceeds all the toughest standards - built to protect, built to last. Multi-port air-induction cooling system - industry exclusive 11 intake vents coupled with 4 exhaust vents circulate massive amounts of air to keep your head cool even in the hottest of conditions. Composite construction shell constructed using state-of-the-art, aircraft grade woven carbon fiber and Kevlar composite materials, which creates superior strength while remaining extremely light. Tri-vent goggle anti-fog vents - 3 Air intake vents above goggle eye port draw air from goggle to help clear away fog. Dual density EPS liner - two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact . Flow-through EPS and comfort liner air system align to maximize airflow. Plush comfort liner with quick-snap technology removes easily for washing via custom molded snaps and cheek pad airframe. Custom molded rubber trim with nose guard - equipped with smooth lines, the integrated nose guard helps keep pesky rocks away from your nose. Lightweight aluminum hardware - helmet is constructed using super-strong, lightweight machined aluminum screws, rivets, and D-rings for superior strength and years of worry free use. Optional carbon fiber intake vent wing can be added to the helmet for increased direction of airflow on the front vents .
44 Years - 56 Championships - 1 Brand Every great victory is the accumulation of thousands of ordinary efforts that no one sees or appreciates. Those early mornings and long motos at the practice track, the extra miles on the road bike, the countless hours of conditioning, and the singular focus and commitment to keep advancing. That commitment inspires THOR to continually strive to advance the performance, durability, comfort and style on every piece of moto equipment they produce. With feedback and input from the best riders on earth, THOR creates products that are the result of countless hours of design and testing to ensure they dont just meet your expectations, they exceed them. Ratchet closure buckle system provides a secure, custom fit every time. Leather chassis construction offers excellent flex and feel. Split-grain leather calf guard for abrasion and heat resistance. Contoured shin plate and ankle plate for impact and abrasion resistance. Bio-foam lined interior and insole provides superb comfort and cushioning. Welted rubber outsole with steel shank insert for maximum support. CE approved.
The RS-4 is a unique design with predicated power and a quiet earthy exhaust note that speaks volumes for performance. This RS-4 features all the benefits of the original RS-4 muffler, but with a unique turned-out end-cap, designed to direct exhaust heat and gases away from the bikes components. To top-it-off, they embossed Yoshimuras "347" logo in the carbon for a clean look. With all its benefits in mind, the RS-4 was an obvious choice for the WR450F. Aluminum pentagonal shaped muffler sleeve and aluminum mount bracket. Features a polyresonant duplex chamber, a two-staged stepped baffle, and an innovative carbon cone end cap. Durable high-grade stainless steel tapered header and mid-pipe. Considerable weight reduction. Carbon fiber end cap comes with a U.S.F.S.-approved Spark Arrested insert installed in the muffler. Step-by-step directions and all necessary hardware included for an easy installation. Note: For closed course competition use only. Not intended for street use.
"this full exhaust system is da stuff!!! quick & easy to put on! sounds very nice! and omgosh power everywhere now! comin out of a turn and pinn the throttle your front tire will be lifting up!!! GREAT PIPE!!"
As the pioneer of quiet performance mufflers, FMF raised the bar again in 2007 with the second generation of Q series mufflers, the Q4. Built from the ground up, the Q4 is a completely new design, engineered for maximum performance while maintaining a sound level at or near 93 dB on most models. The Q4 is the market leader for low sound / high performance. Less sound equals more ground. Q4 Details: The Q4 incorporates Factory Forward Engineering to move the muffler closer - centralizing the mass for improved handling characteristics. The new Hi-Flo formed end cap reduces weight and is less prone to damage. The Q4 has an anodized aluminum canister and is lighter and quieter than the original Q model slip-on. All Q4 exhausts utilize a maintenance-free USFS-approved turbine type spark arrestor so there is no screen to clean or burn out. The Q4 employs free-flowing internal baffles and chambers, advanced sound-absorbing materials and a reduced weight. Max Sound output 96 dB, most models below 93 dB. Constructed from aircraft-grade aluminum and high-strength stainless steel. Use with stock or FMF header.
The redesigned PowerBomb is a four-stroke header that incorporates FMFs patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. The result is a flow increase of nearly 10%! The outer chamber in the PowerBomb allows the air to expand, cool and ramp back up at a higher velocity. Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). Tuned for bottom to mid performance. PowerBomb headers are the front runner in performance headers. Designed for full service access to oil filter. Detailed Specifications: Type: Header. Configuration: Single. Header construction: Stainless steel. Header type: PowerBomb. Note: For closed course competition use only. Not intended for street use.
For over 40 years, Alpinestars has produced superior motocross footwear with a paramount commitment to protection, performance and style. The Tech 3 boot represents all of this commitment with an added level of accessibility unmatched by any boot. Ideal for beginners but more than suitable for experts, the Tech 3 offers maximum value and performance at this price point. With its contoured TPU shin plate, reinforced leather rear plate and extended inside and outside guards, the Tech 3 provides some of the best external protection of any boot on the market. The internal shock-absorbing padding protects ankles, while Action leather and front / rear accordion panels allow for a great fitting boot with a low break-in time. As with all of Alpinestars motocross boots, the Tech 3 is CE certified and features replaceable soles and buckles, to ensure maximum performance for many years. The Alpinestars Tech 3 Boots are what you can expect from Alpinestars, high performance and loaded with functional features. The best feature of the Alpinestars Tech 3 Boots is the entry level price. Protection on the Tech 3 Boots are what you can expect from a company like Alpinestars. They have installed contoured shin plate protectors which have been injection-molded with high-modulus polyurethane to provide substantial impact and abrasion resistance. Alpinestars developed a patented "ankle-brace" system for the Tech 3 Boots for great ankle support. This system on the Tech 3 also provides ankle padding to reduce shock. The sole of the Alpinestars Tech 3 Boots provides a rigid platform with the contoured, tempered steel shank that has been over-injected with a dual density rubber to provide tons of grip and give you sure footing. The Tech 3 Boots have extended inside and outside plate guards to provide protection on the side and toe-box areas. The Alpinestars Tech 3 Boots have an internal plastic reinforcement placed on the inside of the boot. This reinforcement provides rigidity to the boot for support. Thick stamped suede covers this up and provides contact grip and heat resistance. The calf plate also helps out with grip, support and side contact on the Tech 3 Boots. Alpinestars uses reinforced leather up the back of the Tech 3 Boots, and their action leather on the upper section for durability. The instep flex-zone has also been stitched for additional support and durability. The Tech 3 Boots will keep you strapped in with the four high impact resistant buckles that feature memory positioning and quick release buckles. Alpinestars uses Velcro brand hook-and-loop attached to the elastic stretch PVC gaiter to seal the top of the boot and prevent water entry. Alpinestars adds plenty of comfort features to the extensive list of protection features. The Tech 3 Boots use a poly-fabric lining in addition to a multi-density EVA foam keeping your feet cozy. If you require a special foot bed Alpinestars accommodates your needs with a removable anatomic foot bed.
"these boots are very strong and long lasting! and still wearing them now! they have been threw 2 quads(raptor 250,yfz450) and now going threw a crf250r! and still workn great!!!"
Share this Review:
2010 FOX V1 HELMET - RACE
Fox proves that helmets are not created equal, even with their entry level V1. The Fox V1 helmet is beyond the entry level status especially when it comes to the sick graphics that wrap the injection molded polycarbonate shell. The quality design got the V1 helmet the stamp of approval from DOT and Snell 2005. Fox built in ventilation channels that direct air into the cheek pads to keep you cool and dry for grandma to pinch after you gave it your best. Ventilation continues with vents on the forehead top of the helmet to keep the air and moisture moving.
Setting the standard for power and value, the HMF Performance Series has been track tested with over a decade of championships. The specially designed, unrestricted core provides maximum flow and allows the exhaust to increase horse power and torque evenly throughout the entire power curve. The trademark to the HMF Performance Series is the exhausts sound. With a deep, aggressive sound, youll typically see a 2 - 10 dB increase from the stock exhaust system. Designed for 4-stroke sport quads. T-6061 aerospace grade aluminum canister. TIG welded aluminum brackets. Heavy-duty stainless steel rivets. Two-piece billet end caps that accept a USFS-approved spark arrestor and the exclusive HMF quick-change low dB Quiet Core. Packed with Bristol Core brand pillow packing. Two-year manufacturers warranty. Aluminum brushed finish. Hardware included. Sold individually. Includes installation instructions. Manufactured in the U.S.A. Equal Power: The Performance Series distributes power evenly throughout the entire RPM range. 2 - 10 dB Increase: Depending on the model, you can expect a 2 - 10 dB increase over stock. Unrestricted Core: The Performance Series uses a 2-1/8" non-restrictive core for maximum flow. Less Weight: The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.