The Dunlop Rebate That Sticks!: From September 1st through December 31st, 2013, receive a mail-in rebate of up to $50 with the purchase of any Dunlop Geomax Tire (MX11, MX31, MX51FA, MX51, MX71)! With the purchase of 3 or 4 Dunlop Geomax Tires, also receive a set of 2 "Geomax" tire stickers per tire. *For additional details, terms and conditions, please see linked Dunlop Geomax Rebate Card. The MotoSport.com Dunlop 250 / 450F Tire Combo includes one Front and one Rear Dunlop Geomax MX31, MX51, or MX71 Tire with the following features: Dunlop Geomax MX31: The Geomax MX31 carries a wealth of innovative features that allow the tire to dig down deep for extra traction in sand and mud, resulting in tenacious grip across a wide range of soft-terrain conditions. The Geomax MX31 features Dunlops patented, tapered, "chiseled" shoulder-block shape. A taper in the block creates a smaller point on top that allows the knob to penetrate through the grounds soft surface layer and grab the firmer ground beneath to gain traction instead of floating on the surface. Limited block surface creates a more open pattern for enhanced penetration in soft dirt / sand to contact harder ground for enhanced traction. Chiseled shoulder-block shape helps improve side traction and makes traversing ruts easier. Geomax Reinforced Pattern (GRP) design connects and reinforces the tread blocks for greater tread stiffness, while recessed design in the area between tread blocks helps give the tire superb compliance and ride comfort. Knobs are placed in a unique linked shoulder-block design for better traction and grip in soft-to-intermediate riding conditions. Dunlop Geomax MX51: Geomax MX51 helps deliver enhanced grip, added tread longevity and a wider range of terrain applications, reaching farther into hard-pack conditions. Profile design provides more tread volume (greater land / sea ratio) in the shoulders for excellent cornering grip and a more open center-tread area for straight-line grip. Recessed biting edges in shoulder tread blocks yield enhanced traction for greater grip in corners and ruts throughout a wide range of terrain conditions. Tie-bar design connects and reinforces the tread blocks for greater tread stiffness, yielding improved intermediate-to-hard terrain performance. Recessed design in the area between tread blocks gives the tire improved compliance for enhanced ride comfort. Knobs are placed in a unique "cross-stitch" shoulder-block distribution for enhanced traction and grip in intermediate-to-hard riding conditions. Larger-radius tread block base for strength and enhanced tread longevity. Dunlop Geomax MX71: The Geomax MX71 incorporates innovative features to help deliver optimum performance in hard-pack / blue-groove conditions while also crossing over well into intermediate terrain conditions. Profile design features more tread volume (greater land / sea ratio) in the shoulders for enhanced cornering grip. Directional front tire pattern and geometric shoulder-block shape for enhanced braking grip and cornering traction, and enhanced slide control. Directional and asymmetric rear tire pattern plus "Double Tornado Wave" rear tire block distribution for optimum traction and braking ability. Unique placement of "camber traction blocks" for optimum lean-angle traction and grip when exiting corners. Dunlop Geomax Reinforced Pattern (GRP) design for enhanced wear and resistance to tread block tearing. Variable spacing between center tread blocks for enhanced performance. Recessed biting edges yield enhanced traction for greater grip throughout a wide range of terrain conditions.
"pushed in turns when riding in loose stuff. wear was excellent. would probably not buy this again because my 2007 yz450 already has front end slipping problems. but im sure it would be fine with other bikes."
The Michelin Inner Tube provides outstanding protection against punctures and pinch flats, and is the perfect choice for when the road gets tough. Features an overlap splice which is stronger than the butt splice used on most tubes. Splice is always placed opposite the valve stem to help balance the tube. Used by those who want the very best. Technical Specifications: Valve stem type: TR-4 (straight metal stem (8 mm diameter)). Tire size: 2.50-10.
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools of convenience. Do it right the first time with Motion Pro Tools. Curved end fits securely in the hand. Hard nickel-pewter finish. Each lever is 10 inches long and weighs 7.1 ounces. Width at spoon is 25 mm. Includes a handy vinyl carrying pouch. Sold as a pair - Two levers included.
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools of convenience. Do it right the first time with Motion Pro Tools. Curved end fits securely in the hand. Hard nickel-pewter finish. 10 inches long and weighs 7.1 ounces. Width at spoon is 25 mm. Recommended by top tire changers.
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools of convenience. Do it right the first time with Motion Pro Tools. New and improved design of the original Bead Buddy. Durable 6061 aluminum with blue anodized finish and laser-engraved logo. A must for installing Bib Mousse tubes. Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires. Hooks over spoke and pushes bead down on opposite side of tire from tire irons. No more fighting to keep bead down while installing off-road tires. Patented design.
KN Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. KN Powersports Oil Filters are TUV product endorsed and TUV factory production monitored. KN cartridge oil filters trap harmful contaminants while the filters construction allows for high oil flow rates. KN Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service intervals. KN Performance Motorcycle Oil Filters are constructed of resin-impregnated synthetic media, meaning high flow rate and outstanding filtration. When you push your motorcycle to its limits, take comfort in knowing the KN Performance Oil Filter is keeping up with your engine by allowing greater flow rate. Large, uniform pleated synthetic filter media provides high flow rates and outstanding filtration - traps 99% of harmful contaminants. KN has developed their performance oil filter to optimize efficiency with high end synthetic and synthetic blend oils. KN also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown. On many models, KN also incorporates a pressure (PSI) relief valve to prevent oil system damage. To prevent installation damage KN uses a rolled thread to avoid stripping. Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal. KN Limited Warranty. Filter Specifications: Product style: Oil filters. Anti drain back valve: No. Bypass valve: No. Filter material: High flow premium media. Gasket material: Nitrile rubber. Height: 3.813 inches (97 mm). Outside diameter: 2.219 inches (56 mm). PSI relief valve: No. Removal nut: No. Style: Cartridge. Thread specification: N/A. Inside diameter: 0.969 inches (25 mm). Weight: 0.4 pounds (0.18 kg).
Advanced, semi-synthetic aerosol lubricant specially designed for high performance motorcycle chains. Effectively penetrates vital pins and bushes of the chain to provide excellent lubrication and corrosion protection. Quickly thickens by solvent evaporation to leave a thin yet durable coating on the external side plates and rollers, offering outstanding protection, while resisting the tendency to fling off, even at high speeds. Helps to seal the chain and combats the ingress of water and other contaminants that can dramatically reduce chain and sprocket life. Performance-oriented lubricant that is easy to apply and is made with a non-fling formula. Semi-synthetic chain lube for maximum performance on motorcycles and ATV chains. Developed for off-road competition but performs equally well on street bike applications. Produces a thin yet durable coating which penetrates internal chain components to lubricate and protect from water and other contaminants. Offers outstanding lubrication which also maximizes corrosion resistance. Works great for all types of chains, both O-ring and non O-ring. 16 ounce aerosol can.
MotoSport provides a dirt bike stand that is built with quality, exactly like the company itself! The MotoSport dirt bike stand is constructed out of steel, and powdercoated black for a nice looking and long lasting finish. A sweet looking injection-molded rubber top with molded-in "MotoSport" logos keeps your motorcycle in place while the drainage channels keep liquid from pooling. MotoSport is driven by riders and thus knew that adding a drainage hole in the center of the stand brings the status of this dirt bike stand from good to great. The sturdy base makes the MotoSport Steel Dirt Bike Stand able to support up to 350 pounds (158 Kg). Represent the company that has your back with the Motosport dirt bike stand. Dimensions: 17.45"H x 15.75"W (at base) x 15"D (at base) (44.32 x 40 x 38.1 cm). Weight: 7.95 pounds (3.58 Kg).
The Pivot Works Steering Stem Bearing Kit is a great way to restore your motorcycles steering feel back to new without spending time gathering individual parts or paying for overpriced O.E.M. parts. Each Pivot Works Steering Stem Bearing Kit features high quality tapered roller bearings, for longer life and decreased maintenance, to rebuild your O.E.M. steering stem in one simple kit - without modifications. Note: Backed by a lifetime replacement offer!