For use with twist throttle, includes left and right grip. Base material is reinforced with millions of randomly aligned Kevlar fibers, continued use exposes more fibers increasing the percentage of Kevlar at the grip surface. Three times the life of the regular compound allowing the use of a very supple matrix material.
A high quality, 2-stage foam air filter that is pre-treated with No-Toil Evolution biodegradable filter oil. It is perfectly oiled and ready to use right out of the bag. It is built with No-Toil high quality standards and has a 1-year warranty. This is not a cheap, Chinese-made filter. Applications for most current dirt bikes and ATV's. Gloves included for hassle free installation. The best filter at the best price.
"I decided to try these filters because we go through so many. First glance they seem no different than filters twice the cost, so far there holding up well. When the time comes I'll have no reason to second think piching it and putting a new one on."
Castor 927 is a unique blend of highly refined castor oil, a specially prepared synthetic and an additive system that reduces carbon and gum formation and provides excellent rust and corrosion protection. Castor 927 also contains an exclusive additive that keeps power valves cleaner and working properly. For all of us that wish to keep the air and water cleaner, Castor 927 is biodegradable. Castor 927 keeps on lubricating where other lubricants turn to carbon or vaporize, and provides extra protection on cylinder walls, bearing journals and other critical areas at temperatures much higher than other lubricants. Reduces carbon and gum formation and provides excellent rust and corrosion protection. Contains an exclusive additive that keeps power valves cleaner and working properly. Castor 927 is biodegradable. Recommended premix ratios: 50 - 80cc (24 - 32:1) | 125cc (24 - 40:1) | 250cc (24 - 40:1) | 500cc and up (32 - 60:1). Technical Data: SAE viscosity: 40. Color D 1500: Yellow. Gravity: 17.6 A.P.I. Viscosity SUS @ 100F: 617. Viscosity SUS @ 210F: 73. Viscosity cSt @ 40C: 133.1. Viscosity cSt @ 100C: 13.79. Pour point: -5F. Flash point: 420F. Fire point: 480F. Viscosity index: 99. Caution: Not intended for use in oil injection systems. When blending with alcohol, it normally requires more oil. Care must be exercised when blending with low specific gravity (below 0.730) race gasoline or aviation fuels and in temperatures below 35F as separation may occur. Separation may also occur in alcohol containing a high percentage of nitromethane. Check before using.
EVS Grip Donuts offer protection on your hands with a high performing great looking grip donuts for motorcycles and ATVs. EVS Grip Donuts are 3mm neoprene for maximum comfort and protection. EVS Grip Donuts are available in 5 colors to match any motorcycle or ATV. The EVS Grip Donuts are sold in pairs.
Renthal 7/8" handlebars re-wrote history when they became the first aftermarket aluminum handlebar to be fitted as O.E.M. on a Japanese motocross motorcycle. All Honda CR/CRF and Kawasaki KX/KXF models (except minis) are fitted with a Renthal 7/8" handlebar as original equipment. The exclusive aluminum alloy and the advanced manufacturing processes Renthal uses result in a handlebar which is more than capable of withstanding the extreme rigors of motocross and supercross riding and racing. The following features are integral to the Renthal 7/8" handlebars: 7/8" (22 mm) external diameter to fit most standard-sized clamps and controls. 7010 T6 aluminum - which Renthal has exclusive rights to - is a specially developed alloy for the manufacture of handlebars. High impact strength, lightweight and excellent vibration dampening. Shot peened surface finish to help prevent fatigue failure. Knurling - grip end only - increases bonding between bar and grip. No knurling in clamp area, this could cause stress on the riser and lead to fatigue failure. Anodizing - a 15 step anodizing process forms an integral coating giving protection against corrosion. Renthals copyrighted, bonded lightweight single bolt clamping system for the cross-brace* greatly increases strength whilst still allowing flex. Laser-etched positioning grid. The highest quality - 35 individual steps / processes required in the production of each bar and 58 separate quality checks made. A specially developed injection-molded crossbar pad is included with every handlebar. * Note: The cross-brace is fitted to all Renthal 7/8" MX handlebars and the streetfighter handlebars. Renthal. We build championships.