The Maxxis Razr2 tire is the next generation of the Razr ATV tire line and proof that Maxxis is a company that does not ever stop searching for better. The Maxxis Razr2 tire was designed to provide the optimum tire to meet the rigorous demands of GNCC racing by deepening the lugs to increase traction and reduce skid. The Maxxis Razr2 tires allow for better corner control with an aggressive tread design. Maxxis understands that a reliable tire is a must with GNCC racing, which is why they beefed up the Razr2 tire to a 6-ply offering superior puncture resistance. The raised yellow label on the side of the Maxxis Razr2 tires will let everyone know you are running with the best.
Improves snap from idle and pulls harder up to mid throttle. Reduces stalling when negotiating tight trails. The bolt-on pieces smooth and direct air flow through the carburetor, yielding a noticeable power increase. Available for both 4-stroke and 2-stroke. System includes both Power Now and Power Now Plus for maximum performance.
"I installed this sytem on my '05 yfz450 along with the modquad airsystem, motoworks exhaust, and boyesen qs2. The QS2 is supposed to smooth out the power band down low and I definately felt the improvement and I think the Power Now system smoothed out the rest of the power band throughout the entire rpm range and in every gear."
Share this Review:
MOTOWORKS SR4 COMPLETE EXHAUST
The Motoworks SR4 will give you all the power you crave with the sweet sound you desire. Made of 6063 T4 aluminum and has an extruded aluminum mounting bracket. Head pipe is made of 304 stainless steel exhaust tubing with aircraft quality welding and a 6061 CNC machined flange.
Ease of Installation:
Location:San Jose, CA
Loving this pipe
October 13, 2009
"I just got this thing mounted up on my '05 yfz450 and let me say first that it was super easy to bolt in, it looks awesome and it sounds great. Does it add good power? Heck yes. I'm actually glad I didn't go with the other brands and this pipe got some very good ratings including my own."
Share this Review:
Modquad Air Flow System
Allow your ATV to take a deep breath and boost power with the Modquad Air Flow System. The Modquad Air Flow System modifies your ATV's intake system by eliminating the foam filter and its restrictive shape. Modquad engineered a mounting sleeve out of billet aluminum that makes it possible to install the inhale friendly K&N air filter. The use of the K&N air filter allows more air to be sucked into the intake system with outstanding filtration. Modquad steps up the protection with the inclusion of an Outerwear air filter precharger, so you can run your ATV in the sand without worrying about sucking up damaging particles. The Modquad Air Flow System includes: billet aluminum adapter plate, K&N air filter, Outerwear air filter precharger, installation instructions and hardware.
Location:San Jose, CA
October 13, 2009
"Just installed it on my '05 yfz450 and its a nice product. I like that its clean compared to the traditional oily foam filter and not to mention the added power you get from more air flow."
Power-Up jet kit makes jetting your carb simple. FMF teamed up with Dynojet to produce a kit that offers a selection of jets and/or needles to get maximum horsepower out of ATV fitted with an FMF exhaust. Easy to use instructions have diagrams and step-by-step procedures to help you get your jetting where it needs to be, no matter the elevation. No more driving back and forth to the dealer with a handful of jets and needles with a million questions running around in your head on where to start.
Bolt on the Boyesen Quick Shot 2 Accelerator Pump Cover for the missing link your high performance dirt bike or ATV is missing. The Boyesen Quick Shot 2 will boost the fuel capacity into your carburetor by 25% over stock. The boost in fuel by the Quick Shot 2 eliminates hesitation and bog when getting on the throttle. Boyesen engineered the Quick Shot 2 Accelerator Pump Cover with a high volume check valve. An important feature is the accelerated fuel delivery that only the Quick Shot 2 can handle. Improvement on the bottom end will be a noticeable advantage the Quick Shot 2 will give. Running your bike to the limits adds heat which can cause stalling, but the Boyesen Quick Shot 2 will reduce the chances of a hot engine stall. Boyesen designed the Quick Shot 2 so it will fit all FCR Keihin carburetors. The 2007 Honda CRF model houses a high volume check valve that manages fuel through a cartridge design for high sensitivity and instant acceleration.
"I just installed it on my '05 yfz450 in conjunction with the power now kit and it completely eliminated the bog and basically flattened out the power band; I felt just an ultra smooth acceleration through all of the gears."
HOUSER SLICAST LONG TRAVEL MAX GROUND CLEARANCE A-ARMS +.5W,+0F TRANS RED
For the extreme rider or racer who wants to maneuver quickly through the woods or other tight areas. Makes going over any rugged condition that the trail might bring, an easier task. Fine tuning your caster for each track is simple with the SLICAST feature. Requires aftermarket long travel shocks. Made from 4130 chromoly steel, fully TIG welded, and powder coated to hold up to anything that you can put it through. Replaceable plated ball joint with nylon locknuts. Lightweight Chromoly tie rods. 5/8" diameter hardened and polished bearing sleeves. Uses Needle bearings. Reuse OEM dust covers. Adjustable camber. Adjustable caster using provided spacers. Threaded grease zerks.
Will motosport offer long travel shocks to accomodate this kit in the near future?
I'd like to purchase this kit but motosport doesn't seem to offer long travel shocks for it, just the stock length in Elka brand.
42 years in the business, a factory finish and great service and selection are all reasons to purchase a Clarke Fuel Tank. Guarantee: Clarke Fuel Tanks carry a 30 day guarantee against defects and a 1 year against breakage. Some restrictions apply. NOTE: 2003-2004 WR250 / 450 must use YZF radiator shrouds. 1998 - 1999 WR400F, 2000 - 2002 WR426F, and 2001 WR250F models require the use of YZF seat for proper fit.
Will any after-market gas cap fit the bclarke tank or does a replacement cap have to be purchased from clarke?
4 years, 2 months ago
HMF BALLANCE PRO COMPLETE EXHAUST - ALUMINUM - CLEARANCE
The HMF Ballance Pro exhaust system is designed to be a customizable exhaust system that meets the needs of your riding conditions. Tuning your ATV to match your course can make the difference between first and not, which is why HMF designed the Ballance Pro exhaust with the TRM core that allows you to fine tune the ATV's low end torque. The Ballance Pro tunable system was designed to meet the demands of GNCC racing. HMF built the Ballance Pro complete exhaust system with a larger diameter stepped head pipe that reduces exhaust flow to boost power. The sleeve of the Ballance Pro muffler is extruded 6061 aluminum which shaves weight without compromising durability. To provide a durable exhaust system HMF uses 304 stainless steel that will stand up to wheel to wheel racing battles. Go where the trail takes you without being hassled by the BLM with the USFS approved spark arrestor that is included with the Ballance Pro compete exhaust system. HMF engineered the Ballance Pro exhaust in the USA from start to finish. A two year warranty is thrown in with the Ballance Pro complete exhaust system to let you know HMF stands behind their quality products.
This says it is a complete system but does not talk about the headpipe. Does this system come with a head pipe?
Motion Pro Throttle Cables meet or exceed factory O.E.M. performance requirements for outstanding response. Features black fittings and black vinyl coil-wound housing. Inner nylon sleeve for longer life and smooth throttle operation. All cables are made in the U.S.A. with a dedication to quality. NOTE: Motion Pro throttle and clutch cables are supplied dry, without lubricant, and must be lubricated with cable Lube prior to use.