For use with twist throttle, includes left and right grip. Stay in control when pushing the limits with the advanced grip design from White Knuckle Grips and the Series 1 Grip. The Series 1 Grips from White Knuckle developed a 1/3rd waffle design that reduces the diameter of the grips for better control. A unique integrated wiring design and reinforced grip ends make the Series 1 Grips extremely durable for racing. The White Knuckle Series 1 Grips will work with all 7/8” and oversized handlebars.
"I love these grips. If I was a weirdo I would do other things with these grips. They are so soft and comfortable and the design is just amazing. The white grips get really dirty when you touch them, but if you take some water and a paper towel you can clean both grips to shiny white in like 10 seconds. I love these grips. They look like they are full diamond in the photo but are actually half waffle. and the waffle isn't really waffle, they are diamonds. Very cool design."
Braking offers the CM44 brake pads as a great replacement for your motorcycle's braking system or upgrade to a pad that offers great performance and an outstanding wear life. Braking designed the CM44 brake pads to offer a fantastic initial bite and consistent feel for amazing performance. Designed specifically for wet and muddy conditions the Braking CM44 rear brake pads are gentle on rotors due to their unique sintered-metal construction. Because of their design and unique construction, the Braking CM44 brake pads offer unmatched heat dissipation to further enhance racing performance. Includes two brake pads, enough for one caliper.
"these pads are pretty good for the riding I do which is basically just mx tracks. I haven't taken them in sand or mud or water or anything like that though so I'm not exactly sure how they work out in those situations."
Advanced, semi-synthetic aerosol lubricant specially designed for high performance motorcycle chains. Effectively penetrates vital pins and bushes of the chain to provide excellent lubrication and corrosion protection. Quickly thickens by solvent evaporation to leave a thin yet durable coating on the external side plates and rollers, offering outstanding protection, while resisting the tendency to fling off, even at high speeds. Helps to seal the chain and combats the ingress of water and other contaminants that can dramatically reduce chain and sprocket life. Performance-oriented lubricant that is easy to apply and is made with a non-fling formula. Semi-synthetic chain lube for maximum performance on motorcycles and ATV chains. Developed for off-road competition but performs equally well on street bike applications. Produces a thin yet durable coating which penetrates internal chain components to lubricate and protect from water and other contaminants. Offers outstanding lubrication which also maximizes corrosion resistance. Works great for all types of chains, both O-ring and non O-ring. 16 ounce aerosol can.
"I bought the white/red bar pad mainly for looks and didn't expect much protection or cushion or anything like that.. When I got it I was amazed at how squishy yet firm the pad was. It almost resembled one of those tempurpedic mattresses.
My second ride with it I cased it over a big double and smacked my chin on the pad. I walked away with just a scratch on my inner lip from my braces. great pad!"
The original No-Toil Air Filter Oil is a super-tacky, dirt-grabbing, water-resistant filter oil that increases horsepower. It will not wash out with gas, solvents or water alone. But, youll be amazed at how quickly and easily your filter will come completely clean with the highly concentrated No-Toil Air Filter Cleaner (sold separately) and water. The filter will be super tacky and ready for use quickly due to the alcohol carrier. This oil will work on both foam and fabric filters (KN). Super tacky, sticky and amazingly good at stopping dirt. Engineered to not only provide adequate engine protection, but to also focus on performance. Increased airflow due to Micro-Flow Technology, thus providing a horsepower increase by decreasing the resistance of the air travelling through the foam air filter. Easy cleaning in seconds with water and No-Toil Cleaner. Waterproof, will not remove from filter with water alone. Neon dyed to ensure visibility of complete coverage. Biodegradable and non-toxic.
The FMF muffler plug is a great way to keep dirt and debris out of your exhaust while in storage or traveling. Use when washing your ATV or Motorcycle to keep water out of your exhaust system. Tapered rings spanning from 3/4" to 2-1/4". Remember to remove the FMF muffler plug from you ATV or motorcycle before flight! Notes: Check measurements before ordering; will not not fit exhaust outlets smaller than 3/4". Trimming may be required for fit with 2-stroke exhausts.
No-Toil Filter Cleaner is a concentrated formula designed to mix with water. No solvents are required to clean No-Toil treated air filters. The cleaner breaks down the waterproofing chemicals of the No-Toil filter oil and rim grease, before completely washing the oil, grease, dust and dirt from the filter. The non-toxic, no-fume, no-odor cleaning solution is skin-safe, and can be used to clean filters in a bucket of water or the kitchen sink. Its biodegradable and non-toxic, so go ahead and dump the dirty solution right down the drain! Concentrated formula designed to mix with water. Requires no solvents to clean No-Toil treated air filters. The No Toil air filter cleaner is a powder formula that easily dissolves in water. Will break down the waterproofing of filter oil and remove all the built-up dirt and grime with it. The air filter cleaner is biodegradable and non-toxic, without fumes or odors, and is safe on the skin making it an environmentally-sound product.
"It doesn't get some of the stains out but it definitely removed alot of the grease left over. Use this on your filter and then follow it up with a dunk in some soap and water and you will have yourself a good air filter cleaning."
Bel-Ray continues to proudly manufacture all of its products in the United States. Bel-Rays locally-made lubricants have serviced submarines, weathered chilling arctic cold, defied harsh desert dust and heat, raced to championship wins and even traveled to the moon. Bel-Ray Super DOT 4 Brake Fluid exceeds FMVSS Sec. 571.116 DOT 4 motor vehicle brake fluid, SAE J1703 and ISO 4925 specifications. Mixes with all fluids meeting DOT 3 or DOT 4 specifications. For use in all drum or disc brake systems and hydraulic clutches, except systems using mineral-based fluids (LHM). Boiling point: Dry 446F, wet 311F.
Michael's Action ArtMichael J. Petersen has combined his passion for motorcycle racing and his love of art to create these finely detailed action scenes depicting the stars of the racing world. These archival quality prints are mounted on foam-core board, ready for you to frame.Petersen grew up in Ephrata, a small town in Eastern Washington. Petersen started riding at age four. It was one of his favorite activities with his father. Petersen has a lifetime love of riding, racing, mountain climbing and photography. Although action and outdoor-related subjects have always been Petersen's passion, he has recently focused on the motorcycle scene because of his interest in the sport, its incredible athletes, and the positive influence the sport has on youth and families.This drawing was drawn by the artist's hand on archival rag paper. Printed on Epson archival, 100% acid free, smooth fine art paper with Epson archival inks for a museum quality appearance. When displaying the print, Epson recommends using a glass mount to protect your art from discoloring. When transporting the art, be careful not to allow anything to rub across the surface. Also, to maintain its quality for well over 100 years, avoid direct sunlight, high temperature, and high humidity.Dimensions: 14" x 17"