The Alpinestars Bionic Neck Support SB package consists of the following: ONE Alpinestars Bionic Neck Support SB: The Alpinestars Bionic Neck Support SB (Special Blend) is the epitome of neck braces, reaching technological safety features that could only be achieved through the years of research Alpinestars invested. Alpinestars designed the Bionic Neck Support SB to work in conjunction with the helmet when contacted during an accident to dissipate energy throughout the upper body therefore reducing possible injury. The front of the Bionic Neck Support SB utilizes a quick release buckle to open, working off a hinge at the rear. The rear pivot key system is constructed out of durable and lightweight magnesium and allows for the brace to be dismantled in an emergency. Through Alpinestars research, they realized that to provide the utmost safety there needed to be breakaway points. The rear stabilizer is backed with foam that will deliberately bend or fracture during high pressure. This foam continues through the shoulders and chest area with the same features that relieve pin-point pressure. Alpinestars added protection against damaging the collar bone with the Bionic Neck Support SB. Nothing protrudes through the bottom of the shoulder area that could cause injury. Proper fitment can be achieved with the aid of the various thickness foam on the under side of the shoulder area of the Bionic Neck Support SB. Alpinestars constructed the frame from a blend of reinforced Polyurethane to allow the Bionic Neck Support SB to be forgiving with high strength for load distribution. Different riding styles may call for different mounting straps. The Bionic Neck Support SB includes the X-strap or there is the optional upgrade of the A-Strap (sold separately) which wraps around the chest for a more snug fit. Note: the Alpinestars Bionic Neck Support SB, as with any other neck brace, can not completely provide injury avoidance. The Alpinestars Bionic Neck Support SB, like other neck braces, will however, provide some level of protection in most impacts. You are involved in a dangerous sport where no product can provide a guarantee of injury avoidance. Ride within your ability. And, option of adding ONE OGIO Brace Case within which to store the neck brace: Compression molded EVA foam case. Molded base neck brace stabilization. Internal neck brace securing system. Large main dual zipper opening. Zippered goggles / lens storage compartment. Easy access grab handle. Dimensions: 16"H x 11.75"W x 11"D. Capacity: 1950 cubic inches / 31.95 liters. Weight: 2.0 pounds / 0.9 kg.
The latest incarnation of the Tech 8 uses premium materials and innovative design features to create a lightweight boot with unrivaled levels of safety and performance. A unique inner ankle sleeve enhances comfort and fit when riding, while integrated high modulus TPU plates protect you from whatever the trail can throw at you. Evolution improves the breed Innovative design and the use of advanced material compounds have resulted in a 15% weight reduction from the previous version. Upper constructed with a combination of lightweight, Hi-tech Microfiber and leather for the optimum combination of durability, abrasion and tear resistance. Alpinestars unique inner ankle sleeve is constructed from leather with 3D mesh panels and incorporates adjustable shock absorbing gel inserts on the ankles and a removable anatomic footbed for enhanced comfort, fit and protection on the ankle and lower leg. Alpinestars exclusive fully replaceable, high grip, dual-density rubber outsole. Class leading protection and performance Contoured shin and calf plate is injected with high modulus TPU for superior impact resistance and is perforated to increase ventilation. Extended, internal protection plates are also made of injected TPU and guard the ankle and lower foot, as well as the toe-box area. Contoured tempered steel shank is over injected inside the mid-sole assembly for rider safety and support. Stamped steel toe and heel guard. Precision and comfort Dual sliding blade mechanisms on the front and rear of the boot offer progressive resistance to fore and aft movement for enhanced comfort and control straight out of the box. Low profile toe for improved control and sensitiveness in the shift area. New ergonomic ankle construction means no break-in is required for comfortable riding. Full-length, sculpted rubber panel on the inner side of the boot gives superb grip against the bike and is insulated with aluminum foil for improved heat resistance. Instep and Achilles flex zones for superior comfort, control and support. Revised closure system features 4 new self-aligning, quick release aluminum buckles with memory adjustment for precise closure. Top and bottom reverse closure design provides superior impact security and improved fit. Replaceable kick starter protection insert located on the right boot. Soft, TPU gaiter provides an effective seal around the top of the boot, preventing excessive water and dirt entry. Breathable 3D tech mesh lining reduces heat buildup and improves comfort. The TECH 8 Light boot is CE certified.
"The boots fit great, and unlike my other boots they are easier to unsnap and snap on my feet.I did have a problem with one of the buckles coming apart from the boot but motosport gave me the info to alpinestar and they fixed them at no charge or problems.I am very happy with this product."
Pro Taper grips are some of the most widely used grips in professional motocross because of the quality grips they offer. The Pro Taper Pillow Top grips are no exception. Pro Taper Pillow Top Grips are covered in small square cushions (pillows) which give the riders hands extra support and comfort. Made of a custom Kraton rubber compound which provides a super tacky feel and great glove traction. The thickness of the grips provides excellent vibration dampening which will aid in the resistance of arm pump and hand fatigue. Fit any standard or oversized handlebars for motorcycles and ATVs with a twist throttle application.
35 years of experience with the best off-road racers in the world has enriched Acerbis constant technical development, allowing them to become a premier company within the motorcycle industry. This accomplishment is not an end, but rather a base from which Acerbis will continue to research and develop the best products to meet the needs of every rider who mounts an off-road motorcycle. Acerbis commitment is 360 Degrees, involving its entire staff, who are driven by a unique and extraordinary passion. They are proud of their unifying commitment, and are motivated to keep growing and satisfying motorcyclists and champions from all over the world. The Acerbis plastic kit is an easy and affordable way to replace all of your motorcycle plastics in one easy purchase. The MotoSport.com "Mix Match" option allows you to choose each parts color individually to suit your race sponsor colors or your personal style. All plastics included in the Acerbis plastic kit have the original factory shape of the selected bike model. Kits include front and rear fenders, side panels, and radiator shrouds - each in your choice of color. Plastics are pre-drilled for easy stock installation. Made of high-quality Italian-made plastic, for color-stay and long-lasting durability. Acerbis plastic kits are available in O.E.M. colors, solid colors, or all black. Profile your motorcycle with the MotoSport.com ride selector to see which Acerbis plastic kits we have for your ride - not all colors will be available for all models. All Acerbis plastic kits marked "OEM colors" will be the original factory colors. Note: Images are for reference only, actual O.E.M. plastics reflect original two tone color patterns where applicable.