"This is my second pair of these Nike 6.0 Shoe and again I wasn't disappointed. They fit just like any other skate type shoe, and have a flashy and fun style. There is one odd complaint and that is the sole sometimes squeak. Not sure what that's all about."
The ALPINESTARS BIONIC NECK SUPPORT SB package consists of the following: ONE ALPINESTARS BIONIC NECK SUPPORT SB: The Alpinestars Bionic Neck Support SB (Special Blend) is the epitome of neck braces, reaching technological safety features that could only be achieved through the years of research Alpinestars invested. Alpinestars designed the Bionic Neck Support SB to work in conjunction with the helmet when contacted during an accident to dissipate energy throughout the upper body therefore reducing possible injury. The front of the Bionic Neck Support SB utilizes a quick release buckle to open, working off a hinge at the rear. The rear pivot key system is constructed out of durable and lightweight magnesium and allows for the brace to be dismantled in an emergency. Through Alpinestars research, they realized that to provide the utmost safety there needed to be breakaway points. The rear stabilizer is backed with foam that will deliberately bend or fracture during high pressure. This foam continues through the shoulders and chest area with the same features that relieve pin-point pressure. Alpinestars added protection against damaging the collar bone with the Bionic Neck Support SB. Nothing protrudes through the bottom of the shoulder area that could cause injury. Proper fitment can be achieved with the aid of the various thickness foam on the under side of the shoulder area of the Bionic Neck Support SB. Alpinestars constructed the frame from a blend of reinforced Polyurethane to allow the Bionic Neck Support SB to be forgiving with high strength for load distribution. Different riding styles may call for different mounting straps. The Bionic Neck Support SB includes the X-strap or there is the optional upgrade of the A-Strap which wraps around the chest for a more snug fit. Note: the Alpinestars Bionic Neck Support SB, as with any other neck brace, can not completely provide injury avoidance. The Alpinestars Bionic Neck Support SB, like other neck braces, will however, provide some level of protection in most impacts. You are involved in a dangerous sport where no product can provide a guarantee of injury avoidance. Ride within your ability. And, option of adding ONE OGIO BRACE CASE within which to store the neck brace: Compression molded EVA foam case. Molded base neck brace stabilization. Internal neck brace securing system. Large main dual zipper opening. Zippered goggles / lens storage compartment. Easy access grab handle. Dimensions: 16"H x 11.75"W x 11"D. Capacity: 1950 cubic inches / 31.95 liters. Weight: 2.0 pounds / 0.9 kg.
"well i did get this neck brace recently and wanted everyone to know that it fits awesome. I use it with my Thor Force Chest protector, and it was like the protector was made to work with this neck brace. no tweaking or modifying was need to get it to fit together with the protector. just thought id share."
Share this Review:
The highly anticipated Vurbmoto feature film "EPIC" IS HERE! Here's a small sneak peak into what the film is all about. From Trey Canard and Nico Izzi to rising amateurs Adam Cianciarulo and Zach Bell, EPIC covers a wide array of pro and amateur talent in amazing locations around the United States. We hope you enjoy... Soundtrack includes tracks from MGMT, Shiny Toy Guns, RJD2, Foals, The Faint, Coconut Records, Riverboat Gamblers, Goons of Doom, Pepper, and many more.
"I just got my copy and popped it in and was fully entertained. If you aren't familiar with VurbMoto and how they've set a new standard in Motocross Videos, then you're missing out. This new full feature film is not your run of the mill mx vid's, it has an artistic twist in the cinematography. I'll give it a 10 out of 10 and 4 thumbs up!"
Share this Review:
2009 FOX CONCEPT SHOES - SPRING
Fox is running the game with the Concept Shoes that match the functionality and durability of their motocross gear. The Fox Concept Shoes keep up with your fast pace by incorporating a running designed sole all while looking fresh with that Fox style. The air bags out back of the Concept shoe will keep you feelin' like you are floatin'.
"I recently purchased the Orange/White colored concept shoe. The color was the real reason I bought them, but after getting them i was super pumped with the fit and the comfort. I wouldn't be surprised if Nike made these for Fox. They fit like my last pair of Nike Airmax. I would definitely recommend these to anyone looking for an athletic shoe, 5 out of 5!"
Elka sport and competition line of shocks. Available with SSD which gives the suspension maximum traction and stability at the beginning of the stroke while ensuring excellent impact resistance. Available in remote reservoir or piggyback. Lower ride height. 5/8 diameter shaft. Better weight transfer. Compression and preload adjustable. Hard anodizing. Fully rebuildable.
What does RR MX mean as far as where the riding will be done I ride mostly hard packed desert and sand dunes will this shock work for me?
Pro Circuit Ti-4 Titanium Head Pipes are hand-built and are created to be one of the finest bolt-on modifications that you can add to your motorcycle or ATV. The unique design enhances low to mid RPM power, making it the perfect choice for upgrading your stock system. Lightweight, high-quality titanium construction. Unique design enhances low to mid RPM power. "Works"-type finish. Works with Pro Circuit and O.E.M. exhaust. Includes all necessary mounting hardware and complete installation instructions.
Champions like motocross great James Stewart use the Cycra plastic kit, because Cycra made each piece better to improve the performance of your dirt bike. Cycra analyzed the factory plastics and found excess materials being used therefore adding unnecessary weight. Cycra engineered their plastic kit to eliminate unnecessary weight which provides better power output. Strength has been maintained with the use of high quality injection molded plastic for the Cycra kit that also produces a high gloss finish. The Cycra plastic kit includes their revolutionary Powerflow radiator shrouds. The Powerflow radiator shrouds move air more efficiently over your engine to lower temperatures and improve power. The front Cycralite fender, like the radiator shrouds, boosts air flow for cooler running temperatures. The Powerflow rear fender included in the plastic kit gets more air to the intake for better breathing. Cycra did not leave out improving the included side panels, they shaved weight without sacrificing strength. The Cycra Plastic kit includes: Powerflow radiator shrouds, Cycralite front fender, Powerflow rear fender, side panels.
Maier Bodywork is made of tough vacuum-formed high density polypropylene. Maier Front Fenders are built to O.E.M. specifications to ensure an exact fit, and uses stock hardware. Maier products feature a limited one year warranty.
The Renthal chain and sprocket kit is an excellent choice for those looking to upgrade or replace their motorcycles sprockets and chains with one easy purchase. By choosing Renthal you are choosing a wining brand that proves themselves on the racecourse year after year with over 142 world and 111 USA motorcycle titles. Renthal develops all of their dirt bike, ATV, and street bike products in house in their UK facilities to ensure the highest quality product is delivered. The Renthal chain and sprocket kit is an easy and inexpensive way to change the power delivery of your motorcycle, stay with stock gearing to keep the same power delivery or chose different sized front or rear sprockets to alter the way your motorcycle puts power to the ground. Renthal manufactures all of their off-road sprockets using precision CNC machining which is kept to extremely tight tolerances to ensure exact fit and finish. Renthal front sprockets, also known as "chainwheels", are made of 655m13 nickel-chrome-molybdenum alloy steel, which means each Renthal front sprocket provides the ultimate in strength and hardness providing extreme endurance without weight gains. Renthal manufactures the rear sprockets out of specially enhance 7075 t6 aluminum alloy to keep weight down and strength up. Whether you are choosing this kit for a dirt bike, ATV, or street bike application you will receive a Renthal front sprocket, Renthal aluminum rear sprocket and a Renthal R1 520 gold chain (chain upgrades are available from the drop down menu, prices will vary where indicated). You can profile your ride above with our ride selector to see what Renthal kits we have available for your dirt bike.
Maximas Synthetic Blend4 is a blend of ester-based synthetic and petroleum base stocks featuring advanced technology. This special high temperature formula protects critical engine components, reduces wear, friction, temperature, oil consumption and extends drain intervals. The use of new anti-shear additives assures viscosity stability for motorcycle 4-cycle engines with integrated transmissions. This formula also has extra anti-scuff additives to handle extreme loads and peak temperatures. Ester-based synthetic. Reduces friction and engine temperatures. Viscosity stable. Anti-wear and anti-scuff additives. All-weather formula. Easy starts. Reduces engine wear. Improves fuel economy. Smoother transmission shifting. Superior engine cleanliness. Extends drain intervals. Formulated for "wet" clutches. Exceeds JASO-MA M/C 4T specifications. Exceeds API SG/CC specifications. Technical Data: SAE viscosity: 10w40. Color D 1500: Amber. Viscosity SUS @ 100F: 560. Viscosity SUS @ 210F: 78.6. Viscosity cSt @ 40C: 111.2. Viscosity cSt @ 100C: 15.17. Pour point: -25F. Flash point: 436F. Viscosity index: 143.
Thors Force knee guards are their premiere knee guard, offering more coverage and protection than conventional guards yet isnt as comprehensive and cumbersome or expensive as knee braces. Thor has a great reputation for motocross and ATV gear and protection, and the Force brace is right on point. Its got great style, and anatomically correct left and right guards for the most comfortable fit. Thor Force knee guards use a dual pivot system which mimics the movement of your knee without bulky mechanics. Thor Force knee guards also use a wrapped floating knee cup that is designed to improve protection and comfort. Thor designed the Force knee guard to fit riders by size to maximize comfort and safety even further. The SM/MD fits most riders up to 57" tall, the LG/XL fits most riders over 57" tall, and the XXL fits most riders with larger than average legs. Note: The Thor Force Knee Guards are sold as a pair.