Twin Air filters are known in the motorcycle and ATV industry for their unmatched performance, and the Twin Air Dust Cover adds an additional layer for protection especially for extreme conditions. Twin Air designed the dust cover as a coarse pre-filter to withstand the extreme conditions of heavy dust and sand with amazing durability. Designed to extend the service time between filter cleaning, the Twin Air dust cover is a great investment into your motorcycle, even if you are not riding in extreme conditions. Twin Air designed the dust cover to fit over your Twin Air filter to achieve the best fitment.

KN Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. KN Powersports Oil Filters are TUV product endorsed and TUV factory production monitored. KN cartridge oil filters trap harmful contaminants while the filters construction allows for high oil flow rates. KN Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service intervals. KN Performance Motorcycle Oil Filters are constructed of resin-impregnated cellulose filter media, meaning high flow rate and outstanding filtration. When you push your motorcycle to its limits, take comfort in knowing the KN Performance Oil Filter is keeping up with your engine by allowing greater flow rate. High flow rates and outstanding filtration - traps 99% of harmful contaminants. KN has developed their performance oil filter to optimize efficiency with high end synthetic oils. KN performance oil filters come with a common 17 mm nut, drilled for safety wire, mounted on the filter shell. This makes it possible to change out the oil filter with ease and no special tools. KN also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown. To prevent installation damage KN uses a rolled thread to avoid stripping. Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal. Filter Specifications: Product style: Oil filters. Anti drain back valve: Yes. Bypass valve: Yes. Filter material: High flow premium media. Gasket material: Nitrile rubber. Height: 4.063 inches (103 mm). Outside diameter: 3 inches (76 mm). PSI relief valve: Yes. Removal nut: Yes. Style: Canister. Thread specification: 3/4 In. - 16 UNF. Finish: Black. Removal nut size: 17 mm. Weight: 0.8 pounds (0.36 kg).

Maximum coverage with minimal restriction and as much venting as possible is what the Quadrant Protector is all about. Energy absorbing, high density foam padding. Adjustable side buckle system. Free floating shoulder system. Removable arm guards. Fully padded neck roll for comfort. Compatible with most neck braces. Boxed rib construction for rigidity and protection. Refined chest and back contours for a perfect fit. Note: This child's size protector is meant for 40-60 lb riders.