The ALPINESTARS BIONIC NECK SUPPORT SB package consists of the following: ONE ALPINESTARS BIONIC NECK SUPPORT SB: The Alpinestars Bionic Neck Support SB (Special Blend) is the epitome of neck braces, reaching technological safety features that could only be achieved through the years of research Alpinestars invested. Alpinestars designed the Bionic Neck Support SB to work in conjunction with the helmet when contacted during an accident to dissipate energy throughout the upper body therefore reducing possible injury. The front of the Bionic Neck Support SB utilizes a quick release buckle to open, working off a hinge at the rear. The rear pivot key system is constructed out of durable and lightweight magnesium and allows for the brace to be dismantled in an emergency. Through Alpinestars research, they realized that to provide the utmost safety there needed to be breakaway points. The rear stabilizer is backed with foam that will deliberately bend or fracture during high pressure. This foam continues through the shoulders and chest area with the same features that relieve pin-point pressure. Alpinestars added protection against damaging the collar bone with the Bionic Neck Support SB. Nothing protrudes through the bottom of the shoulder area that could cause injury. Proper fitment can be achieved with the aid of the various thickness foam on the under side of the shoulder area of the Bionic Neck Support SB. Alpinestars constructed the frame from a blend of reinforced Polyurethane to allow the Bionic Neck Support SB to be forgiving with high strength for load distribution. Different riding styles may call for different mounting straps. The Bionic Neck Support SB includes the X-strap or there is the optional upgrade of the A-Strap which wraps around the chest for a more snug fit. Note: the Alpinestars Bionic Neck Support SB, as with any other neck brace, can not completely provide injury avoidance. The Alpinestars Bionic Neck Support SB, like other neck braces, will however, provide some level of protection in most impacts. You are involved in a dangerous sport where no product can provide a guarantee of injury avoidance. Ride within your ability. And, option of adding ONE OGIO BRACE CASE within which to store the neck brace: Compression molded EVA foam case. Molded base neck brace stabilization. Internal neck brace securing system. Large main dual zipper opening. Zippered goggles / lens storage compartment. Easy access grab handle. Dimensions: 16"H x 11.75"W x 11"D. Capacity: 1950 cubic inches / 31.95 liters. Weight: 2.0 pounds / 0.9 kg.
Please Note: Opened DVDs may be exchanged for the same title only.The Nitrus Circus 3 series goes way beyond simply being a freestyle motocross film. It is a film about pushing the limits of human ability and spirit. NC3 is full of the most gnarly stunts you've ever seen. Join Travis Pastrana and the rest of theNitro Circus clowns as they travel the world in search of the next big stunt or adventure.
Privateer priced pipeguard with works protection Sturdy armor for your vulnerable and expensive exhaust 3mm thick aluminum is the thickest pipe protector available for the 2-strokes Helps prevent power-robbing dents 24" long for universal fit on 2-stroke exhausts Made in the USA
The Thor Static gloves are part of thier rugged off road line that is made to take a beating and provide continued performance. Thor constructed the palm of the Static gloves from durable Clarino® that has been lightly padded for comfort. The back of the Static gloves feature 2-way spandex construction that is anatomically cut for unrestricted movement. Thor uses direct inject logos on the knuckles and back of the hand to provide protection from roost and debris. The Thor Static gloves feature a hook and loop closure to keep the glove secure.
A little style goes a long way and the One Industries swing arm decal will finish off your dirt bike's style. The One Industries swing arm decal is made from the same material as the tough graphics they are famous for, and represent your dirt bike's manufacture. These swing arm decals come pre-cut for quick and easy installation.
KN Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. KN Powersports Oil Filters are TUV product endorsed and TUV factory production monitored. KN cartridge oil filters trap harmful contaminants while the filters construction allows for high oil flow rates. KN Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service intervals. KN Performance Motorcycle Oil Filters are constructed of resin-impregnated cellulose filter media, meaning high flow rate and outstanding filtration. When you push your motorcycle to its limits, take comfort in knowing the KN Performance Oil Filter is keeping up with your engine by allowing greater flow rate. High flow rates and outstanding filtration - traps 99% of harmful contaminants. KN has developed their performance oil filter to optimize efficiency with high end synthetic oils. KN performance oil filters come with a common 17 mm nut, drilled for safety wire, mounted on the filter shell. This makes it possible to change out the oil filter with ease and no special tools. KN also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown. To prevent installation damage KN uses a rolled thread to avoid stripping. Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal. Filter Specifications: Product style: Oil filters. Anti drain back valve: Yes. Bypass valve: Yes. Filter material: High flow premium media. Gasket material: Nitrile rubber. Height: 4.063 inches (103 mm). Outside diameter: 3 inches (76 mm). PSI relief valve: Yes. Removal nut: Yes. Style: Canister. Thread specification: 3/4 In. - 16 UNF. Finish: Black. Removal nut size: 17 mm. Weight: 0.8 pounds (0.36 kg).
Padded synthetic leather palm and thumb reinforcement for added comfort and durability. Breathable, flexible materials throughout for added airflow and comfort. TPR finger protection. Pre-curved finger sidewalls provide a superior grip.
MSR brings the VX1 ATV boot to offer great off road traction and protection at a great price. The VX1 boots are constructed with genuine leather for a great feel with a short break-in period. MSR uses polyurethane for good flexibility in addition to polycarbonate for protection on the shin, inner foot, toe box and outer foot. The buckles on the VX1 ATV boots mimic those that are found on higher priced boots and operate with ease. Two stage positions are found on the buckles system to accommodate a wide range of sizes. Split leather panels can be found on the inner section of the VX1 boots to guard against high heat and provide resistance against abrasion. MSR steps up protection by adding reinforcement to the inner boot for the ankle. A gnarly sole with deep lugged traction is a part of the VX1 ATV boots to keep you trekking and exploring.