Renthals R3-2 O-ring Chain is a high-strength sealed-ring chain with excellent impact load resistance designed specifically to withstand the stress found in off-road applications where an O-ring chain is desired. This chain is the choice where a combination of high strength, light weight and maximum power transfer are important considerations. The O-rings help extend chain life by retaining the special vacuum-injected grease near the critical pin area. Chain comes pre-stretched to shorten break-in period. Nitrile O-rings extend chain life by retaining special vacuum-injected grease inside the chain joint. Shot-peened alloy steel side plates for high tensile strength and maximum impact load resistance. High-carbon alloy steel bearing pins for excellent resistance to wear. Gold colored side plates help prevent corrosion. Pre-stretched to enhance performance of the chain. Available in 520 pitch only. Average tensile strength of 7,644 pounds. Wear life index: 750. Maximum displacement (street / off-road): N/A / 500cc. Weight (per 100 links): 3.36 pounds. Each chain includes a pair of latex gloves for mess free installation. 120 links. Note: The Renthal R3-2 chain is supplied with both an easy-fit split master link and a superior solid-pin rivet master link which matches the durability of the chain. Note for installing O-ring chains: As O-ring chains are wider than standard roller chains, when fitting an O-ring chain to a motorcycle that was fitted with a non O-ring chain as original equipment, it is essential to check that there is proper clearance of the engine cases near the countershaft sprocket and any other places of close contact. Failure to do so could result in damage to the chain and motorcycle and could ultimately cause the chain to fail.
"i replaced my stock chain this chain looks better an has held up great ive had it on for 2 summers now an have not had to tighten the it once. seams like o rings r drie rotten but might be from both winters i did use o ring safe chain lube. other than that no major signs of wear"
Wear and tear on your motorcycle is part of the game, but it does not have to be expensive thanks to Acerbis and their Swing Arm Rub Plate. The Acerbis rub plate is constructed out of durable rubber and formed to match O.E.M. specifications. Installation is a cinch with this rub plate with the use of the O.E.M. hardware. Made in Italy. Note: Image is for representation only; actual item will vary by fitment.
"i replaced a wore out one it went on easy an everything is close enough to lining up botom has a bump in it where holes didnt line up but chain doesnt ride there. i hav rode for 3 days at brushy mnt. nc. an shows no sings of wear so far"
MSRs Quick Aluminum Epoxy Putty will harden in only 15 minutes. It is a no-waste, self-contained hardener which you apply directly to surfaces when it is needed. Quick Aluminum gets hard in 15 minutes. No waste; break off only what is needed. Self-contained hardener. Break off, knead and apply.
"i put it on before 3 days at brushy mnt. it looked great. hose was stiff i used little heat went right on droped a lil superglue in there. it leaked gas horribly an seamed to cause gas to overheat it also still fell off i wouldnt recomend"
The Renthal chain and sprocket kit is an excellent choice for those looking to upgrade or replace their motorcycles sprockets and chains with one easy purchase. By choosing Renthal you are choosing a wining brand that proves themselves on the racecourse year after year with over 142 world and 111 USA motorcycle titles. Renthal develops all of their dirt bike, ATV, and street bike products in house in their UK facilities to ensure the highest quality product is delivered. The Renthal chain and sprocket kit is an easy and inexpensive way to change the power delivery of your motorcycle, stay with stock gearing to keep the same power delivery or chose different sized front or rear sprockets to alter the way your motorcycle puts power to the ground. Renthal manufactures all of their off-road sprockets using precision CNC machining which is kept to extremely tight tolerances to ensure exact fit and finish. Renthal front sprockets, also known as "chainwheels", are made of 655m13 nickel-chrome-molybdenum alloy steel, which means each Renthal front sprocket provides the ultimate in strength and hardness providing extreme endurance without weight gains. Renthal manufactures the rear sprockets out of specially enhance 7075 t6 aluminum alloy to keep weight down and strength up. Whether you are choosing this kit for a dirt bike, ATV, or street bike application you will receive a Renthal front sprocket, Renthal aluminum rear sprocket and a Renthal R1 520 gold chain (chain upgrades are available from the drop down menu, prices will vary where indicated). You can profile your ride above with our ride selector to see what Renthal kits we have available for your dirt bike.