MS3 - Soft / Intermediate Terrain. MH3 - Intermediate / Hard Terrain. For the M12 and S12 tires, the sizes are as follows: 100/100-18 = Michelin size of 120/90/18. 100/90-19 = Michelin size of 120/80-19. 80/100-21 = Michelin size of 90/90-21. Note: Please check your current tire size to ensure you are ordering the correct replacement size.
Alpinestars built the Tech 10 boots leaving nothing behind in arguably the most technologically advanced boot on the market. The Tech 10 boots have been designed to offer the highest level of safety without compromising comfort. Alpinestars was able to accomplish this with their revolutionary dual hinged inner brace. By placing a dual hinge point on the inner brace of the Tech 10 boots, Alpinestars brings the support closer to your ankle with optimum protection. Getting all this protection doesn't sacrifice the free flow motion thanks to years of development. Alpinestars designed the exterior of the brace out of polyurethane while the interior features a poly fabric lining with open cell foam to absorb shock to the ankle and heal. The ultra thin and flexible forefoot allows for control feedback to easily flow through the Tech 10 boots. The ultra low profile design of the outer shell of the Tech 10 boots allows for additional control. The slim design of the Tech 10 boots also shaves weight off and increases flexibility. Alpinestars developed a rear polyurethane spine that helps keep the Tech 10 boots from hyperextension. The full-grain leather upper of the Alpinestars Tech 10 boots break in quickly. This feature paired with the impact and abrasion resistant polyurethane provide a high level of safety. The Tech 10 boots have polyurethane protection on the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and Achilles tendon. The sole construction of the Alpinestars Tech 10 boots offer a dual compound design that offers a sure foot grip where its needed and a rigid platform for extra protection. The advanced closure system on the Tech 10 include 3 techno-polymer and aluminum buckles that have memory positioning and quick release/locking system that self-align. The self-aligning buckles make it simple and easy to operate. Alpinestars uses a combination of full-grain leather and polyurethane panels to provide maximum grip while offering heat and abrasion resistance. The opening of the Tech 10 boots are lined with a polyurethane gasket to keep the water out. Alpinestars offers their airflow ventilation system on the white model of the Tech 10 boots.
"It took me a little bit to decide if i should do these or the tech 8. And 100% happy with my decision. I wished i would have bought the exact size i wear unlike how there know for going one size up. This model boot is true to fit so if your a 11 get a 11.... I had a little defect with the boot and this Motosports is just amazing on taking care of there customers. They got on it right away, and had new inner booties out before i new it.... Great Job!!!! I highly recommend doing business with motYoosports and highly recommend these boots."
Shoei Safety Helmet Corporation prides itself in producing the best helmets that technology will allow, and never before has that been more evident than with the all-new VFX-W. The absolute pinnacle of all off-road helmets, the VFX-W is the result of countless hours of conceptualization, R&D, and testing with the most hard-nosed critics of all, our professional racing team. Drenched with state of the art new features, no stone was left unturned during its development. With safety, performance, comfort, and styling all critical factors, the VFX-W is perfect in every detail, as it ushers in the future of helmet technology with the type of quality that only Shoei is known for. AIM+ Shell Construction Shoei's proprietary AIM+ technology. This process combines fiberglass with organic fibers that are so strong that they can only be cut with a laser. The end result is a stronger, lighter shell that will absorb and distribute the force of an impact safely and efficiently. Dual-Layer EPS Liner Dual layer liner yields enhanced impact absorption by adjusting thickness and density in key areas. Inner liner features air channels for efficient cooling. Impact-absorbing EPS liner throughout the entire chin bar. V-430 "Sleek" Visor Developed by Shoei's sponsored riders. Lengthened for additional protection from sun and roost. Adjustment slot lengthened for greater versatility. Plastic hardware is utilized for easier visor breakaway during impact. Includes a matte black strip to reduce glare. 3D Max-Dry Liner System Polyurethane foam pads are three dimensionally formed for a perfect fit. Proprietary synthetic fiber absorbs and exhausts sweat 2X faster than conventional nylon. Liner is removable, adjustable, and washable. Emergency Quick Release System (EQRS) Mechanical tabs disengage cheek pads for easy removal by emergency medical personnel. Helmet can be removed with minimum load to rider in emergency situations. Ventilation System Improved air intakes are located in mouthpiece, forehead, and through scoops directing air into EPS liner. Seven exhaust ports dispel hot air from the rear of the helmet. Vent openings are covered by wire mesh to prevent dirt from entering liner. "Sleek" Mouthpiece Wire mesh screen helps prevent roost from entering the mouthpiece. A strip of AIM+ shell material reinforces mesh screen and helps to reduce chances of larger intrusions. Sleek mouthpiece directs cooling air through a removable and washable foam filter. 5-Year Warranty 5-Year Warranty From Purchase Date. 7-Year Warranty From Helmet Manufacture Date. Whichever comes first.
"First off i have to give motosports A BIG Thanks & Credit, The Customer service is top notch here! There service is amazing and They don't mess around or take there time. If they have it you can count on it to be at your door in 1-3 days max.... If they don't they do everything they can to get it out to you, or provide something comparable if not even better. Im a customer for life... The Helmet is just amazing, The Fitment, quality, Comfort is all just superior. As we all know and can see its not cheap and wonder how to justify it. I felt like that till the day it cam in, Once i pulled it out of the box and see the quality and put it on, it was all forgotten and haven't thought about it again. On top thats chump change to what medical cost. If its not comfortable your always gonna hate wearing it, so why not get one you love wearing. It was totally worth saving up the extra money to get it. I will also provide a actual pic of what it looks like, i know that was the hardest part for me on deciding color. Not knowing if it was enhanced or a few shade off, where it could be a mind changer. I got the white one (actually called blue) it honestly looked 20 times better then any pic i have seen. Get it worth every penny!!!!!!!!!!"
Fasst Companys Spoke Torque Wrench is the factory mechanics secret to maintaining their wheels. In fact, it is used by the majority of factory and factory support team mechanics in the AMA Supercross and Nationals and in the GP series since 1999. Eliminates guesswork - Eliminates the guesswork of wheel and spoke maintenance. Provides proper technique - Provides an even pull throughout the wheel for maximum strength. Used by the best in the industry - The majority of factory team mechanics in the American and International racing disciplines use the Spoke Torque Wrench. Premium quality - Produced out of drawn-over-mandrel tubing with precision machined, heat-treated tool steel internals for accuracy. Premium warranty - Lifetime warranty on the Spoke Torque Wrench. Note: Spoke Torque Wrench only; spoke heads sold separately. The Spoke Torque Wrench comes pre-set, anywhere from 10 - 100 inch-pounds. Simply tighten the spoke until you hear and feel a click, and you know the spoke is adjusted to the correct amount of tension providing you an even pull over your whole wheel for exceptional strength. The Spoke Torque Wrench takes all the guesswork out of wheel and spoke maintenance allowing you to care for your wheels like a factory mechanic. The tool is a precision instrument delivered alone, without spoke heads.
"I have to say this is the snap on of bike tools. It works perfect and makes your rim perfect as long as you follow the instructions. The tool is only as good as the operator. All you have to do is just make sure you have the same amount of turns on every spoke and then let the tool do the rest. I would without question recommend this tool. its nice to know that your rims are perfect, and it took less then half of the time then it normally would.
Bolt Motorcycle Hardware Full Plastics Fastener Kits include all factory replica fasteners and aluminum bushings needed to fasten complete bodywork. O.E.M. quality fasteners at a fraction of the cost. A must when installing new plastic on your ride.