New super low profile fork bleeders allow you to bleed air pressure in your forks to reduce harshness. For use on most Kayaba and Showa inverted forks with a M5 x 0.8 air bleed screw in the fork cap. New ultra-compact, low profile design is only 11 mm high installed. Stainless steel body is stronger and will not corrode. Easy to install, simply replace the OEM bleeder screw with the micro bleeder. Reduces harshness caused by air build-up. Allows bleeding of air pressure without tools. One of the easiest bolt-on upgrades you can make to your forks. Kit includes two bleeder valves.
Engine Ice is a great way to keep your motorcycle or ATV running cooler and performing well with a product that is not harmful to the environment. Engine Ice is made from Propylene Glycol which is biodegradable and non-toxic. It is premixed with de-ionized water which eliminates all impurities for maximum performance and durability - even distilled water contains particles of metal and chemicals which cause scarring, scaling, clogging and mineral buildup. Engine Ice is proven to reduce motorcycle engine operating temperature by as much as 50F - a necessity for todays high-performance bikes which overheat just idling. Because of Engine Ices non-toxic phosphate-free formula, it is safe for people and pets. Made of Propylene Glycol which is biodegradable and non-toxic. Premixed with deionized water which eliminates all impurities. Proven to reduce operating temperatures by as much as 50F. Engine Ice is the only coolant sold in motorcycle dealerships that is legal in AMA, CCS, FUSA Road Racing and AMA / Prostar Drag Racing. Used by top racers like James Stewart, Ernesto Fonseca, Chad Reed, Randy Hawkins.
"So I have been a Engine Ice fan for a while, with the 4 strokes these days, heat is an issue and I think this stuff helps a little, pretty sure its minimal but every little bit helps. This stuff with a water pump and impeller kit I think is the magic to help with overheating"
This complete Top and Bottom End Kit has everything you need, all the quality parts, including a Wiseco Piston, to rebuild your motor. Includes: Hot Rods Crank, Bearings and Seals, Complete Gasket Kit and Wiseco Piston. Hot Rods Crankshaft: Building on the success of high-quality, O.E.M. replacement rods, Hot Rods introduced the perfect place to showcase them in a complete heavy duty Hot Rods O.E.M. replacement crankshaft. Since that time, Hot Rods heavy duty crankshafts have been regarded as the premier alternative, Hot Rods heavy duty crankshafts also bring a level of uncompromising quality, design and innovation not seen in its competitors. All crankshafts are sold complete and ready for installation with the original proven Hot Rods connecting rods, and crankshaft webs. Factory assembled and trued to O.E.M. specifications, Hot Rods cranks will meet or surpass the O.E.M. in performance and durability. Crankshafts are fully re-buildable with genuine Hot Rods connecting rods and bearings. Multi-cylinder applications are sold complete with main bearings (unless specified otherwise). Two and four-stroke applications available. Hot Rods Bearings and Seals: To compliment Hot Rods full line of heavy duty O.E.M. replacement and stroker crankshafts are Hot Rods complete main bearings for both two and four-stroke applications. Like other Hot Rods products, these main bearing and seal kits are built to the highest quality standards that meet or exceed those of O.E.M. Additionally, not only will Hot Rods main bearing and seal kits work in rebuilding a Hot Rods crankshaft but, they also work in rebuilding O.E.M. cranks as well. Athena Gaskets: The Athena complete gasket kit is an all-in-one kit featuring superior quality gaskets to rebuild your motorcycle or ATV engine. Athena ensures they are only using the highest quality gaskets to provide a great seal every time. All Athena gaskets are designed and built to meet or exceed O.E.M. specifications. Wiseco Piston: Wiseco Pro-Lite motorcycle pistons are forged using the highest quality materials available resulting in a piston that provides excellent performance and durability. Wiseco Pro-Lite pistons feature a race-ready dome finish with smooth edges for improved combustion flow. The rings, wrist pin, and circlips are manufactured by Wiseco under their strict quality standards to make sure every piston kit fits correctly, ensuring top performance is achieved. The Wiseco Pro-Lite Piston includes: piston, ring(s), wrist pin, and circlips.
"This kit worked out great for my CRF250, it is exactly what you need for a total low end rebuild which unfortunantly I had to do, but in comparing prices this kit was the best deal around and motosport as usual delivered quickly. Now my bike is back together again and all is right in the world!!"
Oakley keeps your vision clear with their tear offs for the MX O Frame goggles. The Oakley O Frame tear offs mount easily to the MX O Frame goggles and easily tear off. Oakley makes the O Frame tear roffs out of the finest optical grade MYLAR.
"The Oakley tear offs work very well, you can't pile on too many but 3 or 4 is perfect of course I only need one though right right right come on who's with me :) Ok maybe not but I would not race without them."
1 of 1 people found this review helpful.
Share this Review:
OAKLEY O FRAME GOGGLES
Anti-scratch 1mm Lexan lens. Available Tear-Off System. Face-hugging design.
Overall:
4out of5
Scoops
Location:Minneapolis, MN
Rock the most
October 23, 2007
"I love the Oakley O frames, way comfortable and work excellent with tear offs."
Share this Review:
2007 NO FEAR FORMULA GLOVES
Clarino palm with ergonomic stitching. Molded Airprene knuckle guard. Breathable open-cell dimple mesh top stretch in thumb, for better fit. Tacky rubber fingerprint for lever control. Lycra/Spandex finger side panels for fit without bunching.
Overall:
4out of5
Scoops
Location:Minneapolis, MN
No Fear Gloves
October 11, 2007
"I have tried several brands and styles of gloves and these are one of the better ones. I have found if you find a pair that doesn't bunch in your palms but still fits well is a huge deal, otherwise blisters will happen and maybe its because I have too much of a death grip..:) but my riding skills are questionable at best."