Moto Tassinari is the leader in reed valve technology. Their V-Force 3 Reed Valve System will help increase the power and performance of your motorcycle or ATV. Key Features on the V-Force 3 Reed Valve System: Rubber over-molded reed cages to promote long reed life. The unique and proven design of the V-Force 3 Reed Valve System doubles the available reed tip surface over a conventional reed valve design. The V-Force 3 Reed Valve System design widens peak power and increases the horsepower over the entire range of the power band. The V-Force 3 Reed Valve System incorporates the industry's first and only patented snap together reed valve design. The entire assembly is completely screw free, meaning that when reed petals need changing the job is now literally a "SNAP". Profile your ride with our ride selector to select the V-Force 3 Reed Valve System for your motorcycle or ATV.
Important note: This piston is for a stock sized bore. Please measure your cylinder to check clearance before ordering. Wiseco leads the performance aftermarket by producing the highest quality forged pistons in the U.S.A. Wiseco is unique because they forge all of their own pistons in-house, and produce all of their own forge tooling in the U.S.A. This allows Wiseco to control all aspects of their manufacturing process from raw bar to skirt coating on the finished parts. Extreme racing conditions demand the strength and toughness that only forged pistons can offer. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Most castings are brittle, have no grain structure and tend to fail catastrophically when the material yield strength is exceeded. Forgings have condensed grain that is aligned to the features of the part, which produces higher mechanical properties, and resistance to impact and fatigue. Each forging is designed to optimize the strength-to-weight ratio, and maximize performance. Wiseco Pro-Lite motorcycle pistons are forged using the highest quality materials available resulting in a piston that provides excellent performance and durability. The Wiseco Pro-Lite piston features a race-ready dome finish with smooth edges for improved combustion flow. The rings, wrist pin, and circlips are manufactured by Wiseco under their strict quality standards to make sure every piston kit fits correctly, ensuring top performance is achieved. Bore size: 52 mm (Standard). Much stronger than stock. Tight tolerances for quiet running. More hours with peak performance between piston changes. All Pro-Lite pistons include rings, wrist pin and circlips. Note: Image is for reference ONLY, actual contents will vary based on fitment.
State-of-the-art gaskets is what Cometic has been doing since its inception in 1989. This comes from their dedication to constructing gaskets for the most demanding race circuits like AMA and NASCAR. Todays lightweight engines are producing more horsepower, higher cylinder pressure, clamp load and extreme temperatures. Cometics commitment is to provide innovative, quality gaskets while maximizing your engines power and performance. Cometic meets the needs of each specific gasket by using materials to match. Even the basic top end gasket kit features different materials for each gasket. The head gasket is constructed from non-asbestos, flexible graphite that is laminated to a stainless steel core. The manifold and base gaskets are constructed from non-asbestos nitride rubber-bound fiber. Cometic also includes copper gaskets where needed. Cometic designs and builds their gaskets in the U.S.A. This kit contains the following components: 1 - Inner head O-ring. 1 - Outer head O-ring. 5 - Head crush washers. 2 - Base gaskets. 1 - Intake gasket. 1 - Exhaust gasket.
The Twin Air Air Filters design, high-quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined. Twin Air filters are designed to increase airflow while ensuring the highest level of protection from dirt / dust. Coarse open-pore foam catches airborne dirt, grime and sand. Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage. Exclusively formulated adhesive ensures glue seams will not break down. Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage. Fused outer and inner elements prevent dirt and grime from being lodged between layers, unlike Twin Air, this can be a problem with inferior two-piece designs. Trapped particles can restrict airflow. And, if dirt works its way into your engine, a pinhead-sized granule will gouge your cylinder, piston and rings like a bullet.
Motion Pro has an easy solution to replacing your 2-stroke throttle housing with the Vortex throttle assembly. The Vortex throttle assembly has been constructed out of die-cast aluminum and left with a gray finish and gray rubber mud cover. Motion Pro designed the Vortex throttle assembly to fit 7/8" bar diameter. A 2-stroke nylon throttle tube is included with the Vortex assembly. The throttle tube also features a pop out end for hand guard mounting. Note: the Motion Pro Vortex throttle assembly will fit: KX125/250 92-05, RM125/250 95-05, YZ125/250 96-05, and WR250Z 97. The Honda CR125 93-03, CR250 90-04, and CR500 90-01 require the Motion Pro Vortex throttle cable.
Motion Pro Throttle Cables meet or exceed factory O.E.M. performance requirements for outstanding response. Features black fittings and black vinyl coil-wound housing. Inner nylon sleeve for longer life and smooth throttle operation. All cables are made in the U.S.A. with a dedication to quality. NOTE: Motion Pro throttle and clutch cables are supplied dry, without lubricant, and must be lubricated with cable Lube prior to use.
Motion Pro is dedicated to producing the best cables in the powersports industry. All Motion Pro clutch cables are equipped with the longitudinally wound (LW) housing that provides a smooth, easy to pull, compression-free clutch cable. Motion Pro designs their cables to meet or exceeds O.E.M. standards and are direct O.E.M. replacements. Motion Pro clutch cables incorporate the latest advancements in cable technology. Motion Pro clutch cables inner wire is stainless steel for optimum resistance to corrosion and rides in an inner nylon sleeve for longer life and smooth operation. NOTE: Motion Pro throttle and clutch cables are supplied dry, without lubricant, and must be lubricated with cable Lube prior to use.
For use with twist throttle, includes left and right grip. Comfortable and stylish grip constructed to offer comfortable handling for twist grip motorcycles. Pro Grip designed the 793 EVO grips with new gripping pads to help your two weakest fingers hold onto the handlebars during aggressive riding. Designed Pro Grip's famous Duo Density properties for maximum comfort and control. Constructed with a harder density compound against the bars with two softer density areas in the palm and against the flanger. The profile also provides a stop-tab mini flange at the end of the grip to prevent your hand from slipping off the bar during aggressive and demanding riding conditions.