Set your sights on riding hard and safe with the EVS Vision knee brace that offers the same protection of the high dollar braces without the high dollar price. The EVS Vision knee braces mimic the natural flexion and extension movements of the knee with the anatomically correct aluminum dual pivot hinge. The efficient hinges in the Vision knee braces keep bilateral movement in check while also offering hyperextension control. EVS adds impact protection with the floating knee cup and in the thighs and shins. Sharkskin neoprene lines the Vision knee braces to keep the brace in position while providing exceptional comfort. One strap at the calf and one at the thigh hold the Vision knee brace firmly in place without obstructing movement or boot fitment. Sold as a pair.
Overall:
4out of5
KXDodger
Location:East Texas
Good Braces, but...
November 5, 2009
"I ordered these braces as they got pretty good reviews on other sites. When I received them I was instantly impressed with look and apparent sturdiness. I tried them on and found them a bit bulky but I felt I could get used to them. They have good padding and the straps seem to hold them in place well.
The problem came when I tried to buckle up my boots. I guess because I have short shins (I'm 5'5" and a little stocky at 160) I was unable to buckle the boots at the top due to the shin guard portion of the brace being too thick. They extend down into the boot on my short legs. I had to return them as I was unable to use them.
Some helpful info - I'm 5'5" - 160. My thighs are a bit bulky (muscle) and my shins are about average - I found that the "medium" fit well with the straps and all.
In the sizing chart they say to measure 8" up and down from the center of the knee cap. Do so and note where your boot top will be in relation to that measurement. Then estimate if the boot will buckle at the top with an additional 3/4 to 1" space for the Vision shin guards.
Overall I was a little bummed I was unable to use them. They did seem like a quality product for the price."
FMF O-Ring & Pipe Spring Kit offers high quality replacement pipe O-rings and springs for motorcycle and ATV exhausts. FMF constructed the O-Ring and Pipe Spring Kit with top quality coated materials for maximum performance and durability.
Designed for installation and removal of the swingarm bearings on late model Japanese motorcycles. Using the correct size insert and the puller, the mechanic can draw the bearing either in or out of the swingarm without damaging it with a hammer.
Does this tool work on all swingarms - regardless of brand/model? Are all swingarm bearings of a universal size?
4 years, 5 months ago
by
KXDodger
East Texas
HP Tools Fork Cap Wrench
HP Tools Fork Cap Wrench is a great tool making it easy to removing the fork caps on late model motorcycles from a company that has a strong reputation for having high quality standards. HP Tools Fork Cap wrench is designed to remove the fork caps on late RMs and CRs and features both a 46mm and 50mm end.
Give yourself more time on the track or trail and less time in the shop changing leaky fork seals with the Motion Pro fork seal bullet. Using the Motion Pro fork seal bullets eliminates the need to tape up your forks to prevent damage when installing new fork seals. The Motion Pro fork seal bullets are sold individually. Actual product color may vary.
FMF O-Ring & Pipe Spring Kit offers high quality replacement pipe O-rings and springs for motorcycle and ATV exhausts. FMF constructed the O-Ring and Pipe Spring Kit with top quality coated materials for maximum performance and durability.
Bel-Ray Foam Filter Oil is a foam air filter oil for all street, off-road, and racing foam air filter applications. Innovative Bel-Ray technology has produced a foam filter oil unlike any other. It is easy to apply and improves airflow. Ultra-viscous formula forms an oil barrier to trap micron-sized particles that can cause engine damage. Bel-Rays waterproof air filter oil prevents clogging when wet. Easy to apply and improves airflow. Ultra-viscous formula forms an oil barrier to trap micron-sized particles that can cause engine damage. Waterproof air filter oil prevents clogging when wet. For all street, off-road, and racing foam air filter applications.
You can use warm water with some dish soap or OxyClean to remove it from the filter. Don't use gas or kerosene as it could damage your filter.
4 years, 5 months ago
by
KXDodger
East Texas
HP Tools Fork Cap Wrench
HP Tools Fork Cap Wrench is a great tool making it easy to removing the fork caps on late model motorcycles from a company that has a strong reputation for having high quality standards. HP Tools Fork Cap wrench is designed to remove the fork caps on late RMs and CRs and features both a 46mm and 50mm end.
Will this wrench work on a 2003 KX125?
Apparently, as I have not yet started the disassembly, you can remove the KX125 fork caps with a 19mm socket. No special tool needed as far as I can tell.
FMF O-Ring & Pipe Spring Kit offers high quality replacement pipe O-rings and springs for motorcycle and ATV exhausts. FMF constructed the O-Ring and Pipe Spring Kit with top quality coated materials for maximum performance and durability.
Will this kit work for attaching a Pro Circuit Pipe as well as a FMF?
Actually ... no. Once I received the kit I found that the springs are too long and will not keep the pipe in place. I had to reuse the old springs until I can get some replacements that fit.