The Factory Connection Shock Spring is cold wound on precision CNC equipment. Heat-tempered, shot-peened and end-ground. Pre-set for fatigue resistance. Wide variety of rates and applications are available from Factory Connection to suit your needs. Guaranteed accurate rates and proper fitment.
Factory Connection Fork Springs are cold wound on precision CNC equipment. These fork springs are heat tempered, shot-peened and end-ground. Pre-set for fatigue resistance. Wide variety of rates and applications are available from Factory Connection to suit your needs. Guaranteed accurate rates and proper fitment.
EBC is a company that does not replicate a clutch kit, they make it better and that is exactly what they have done with the DRC Dirt Racer Clutch Kit. The EBC Clutch Kit fiber plates have been impregnated with aluminum particles that reduces swelling, provides heat resistance and makes for a longer lasting clutch kit. The fiber plates in the EBC Dirt Racer clutch kit have modified flanges that reduce "dogging" from the clutch basket. To further improve clutch kit performance, EBC stiffened the clutch springs by 15%. Stiffer clutch kit springs ensure better contact between the clutch plates to reduce wear. The EBC DRC Dirt Racer Clutch Kit was designed as a direct OEM replacement.
"I bought this clutch kit which included "heavy duty springs" The frictions and steels look real good and they do their job. Now the springs are a different story. I installed the springs and torqued them to spec and ended up cracking my pressure plate and bending my clutch shaft arm. The srings were to big and wouldnt allow the clutch in disengage. Had to put the factory springs in it for now."