Twin Air is known for their incredible air filters, and now they designed an air box cover to protect your motorcycle or ATV during washing. Twin Air Air Box Cover is designed to keep water and debris out of your motorcycle or ATV intake system. The Twin Air Air Box Cover fits easily and perfectly over your intake opening once the air filter is removed. Twin Air constructed the air box cover from molded plastic with a rubber sealing edge for the perfect fit. The top screw is included with the Twin Air Box Cover.
Voyager by Trail Tech: The Trail Riders GPS Voyager GPS Computer features: GPS speed, distance, compass, altitude, temperature, maps. View, organize, edit and share entire trail systems in 3D. Designed specifically to meet the needs of off-road riders. 240 x 400 WQVGA LCD - readable in intense sunlight. Engine performance linked to GPS data. Crash-resistant, off-road design. Upload routes from any GPS. Customizable user screens. Model-specific integration. Accurate tracks, even in the toughest terrain. Runs on vehicle power (or internal battery). Back-lit for operation in the dark. The Trail Tech Voyager GPS Computer Kit - Stealth includes the following: Trail Tech Voyager GPS Computer. Mounting hardware - Voyager handlebar mounting hardware. Included in every Voyager kit. Fits 1-1/8" - 7/8" handlebars. Positions Voyager in the center of the controls, in the safe zone below the bars. Wheel sensor - 1450 mm wire length. Magnet kit - Digital gauge magnet kit. Temperature sensor - 22 mm radiator hose insert: 900 mm (35 inch) lead. (Hose clamps included.) Note: Carbureted bikes without lighting circuits cannot power the Voyager, you must use the supplied lithium-ion battery.
"I installed on a 08 Honda CRF250R. For the price you would think they could send a wall charger with it since you cant charge it off of your bike. I like being able to monitor my coolant temp and hours on the bike but the rest is almost useless."
High grade aluminum alloy. Strongest mounting system on market. Oil drainage holes. Full frame rail and rear cross member protection. Water pump and oil pump protection. Venting slots for airflow on most models. Lightweight and effective. MX and Off-road applicable.
Heat Is the #1 Enemy of 4-Stroke Engine Performance Boyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your engines cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. The Boyesen Supercooler can reduce engine temperatures by as much as ten degrees, as confirmed by tests at Team Kawasaki. How does the Supercooler achieve this? Hydrodynamics. Boyesens investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less cavitation. Win the War on Heat, Bolt on a SuperCooler NOW! 2-piece cast aluminum construction. Oil filter access for hassle-free filter changes. Increased coolant flow at all RPM ranges. Patented Nautilus style impeller for hydrodynamic efficiency. Note: Gasket(s) is NOT included; use stock piece(s) or purchase new one separately. Feature details: Casting: By casting a totally new water pump cover, Boyesen was able to maximize the flow through the unit. Boyesens design takes advantage of everything from Bernoullis Effect to biological studies. Superior Internal Hydrodynamic Shaping: Stock water pumps arent very hydrodynamic. Their internal shape and impeller create excessive amounts of air bubbles in the water. Air bubbles lessen not only water flow, but the amount of water per cubic gallon. Boyesens Nautilus-shaped cover and impeller increase pump capacity. Optimized Water Inlet Diameter (High Cooling Capactiy): Unlike the stocker, Boyesens water inlet has an increasing diameter and artfully curved shape. This is a vast improvement over most stock inlets, which decrease in diameter as they near the impeller and have a 90-degree bend at the pump (a very serious hydrodynamic no-no). Optimized Impeller (Patented Nautilus-Style Impeller): Boyesens patented impeller design is 25 percent more efficient at moving water than the inefficient stocker.
"I installed on an 08 honda crf250r. It is very easy to install and it does look a little bigger than the stock one. I gave it 3 stars because of cost, it didn't come with a new gasket, and I cant tell that much of a difference but it does look good."
For use with twist throttle, includes left and right grip. Double density grip. Half waffle design with soft density palm area. Medium density waffle pattern delivers maximum comfort and durability. Soft density palm area reduces vibration, arm pump and fatigue. Integrated safety wire channel.
"I installed it on my 08 CRF250R just for some added protection. I like being able to see the fuel going in to the carb though and since I run the carb out of gas after ride its nice to see it getting emptied."
Acerbis has become an industry leader because of their stylish looks and the way their plastics hold up to the demanding conditions of motorcycle riding and racing. Lightweight polypropylene construction for maximum performance and durability. With a large venting pattern to force air across the levers. Includes a universal mounting system to allow you to position the hand guards independent of the angle of the levers.
"These hand guards look good and so far they work good. I haven't wrecked the bike yet with these on there so i cant really comment on the durability as far as that goes but they do a good job of keeping brush and briars off of my hands. The brackets that hold them to the handlebars seems really flimsy but it may be that way so they dont just snap if you hit something."
The Hot Cams Valve Shim Kit is a must for any motorcycle to keep it running at full power. The Hot cams Valve Shim Kit includes 3 shims for each size ranging from 1.20 thru 3.50 in .05 increments. Hot Cams includes an labeled organizer to ensure accurate shim replacement. Note: 250CC 4-strokes use 7.48 OD shims, 400CC + 4-strokes use 9.48 OD shims, and KTM's use 10 or 8.9 OD shims.
The Twin Air Air Filter's design, high-quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined. Twin Air filters are designed to increase airflow while ensuring the highest level of protection from dirt / dust. Coarse open-pore foam catches airborne dirt, grime and sand. Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage. Exclusively formulated adhesive ensures glue seams will not break down. Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage. Fused outer and inner elements prevent dirt and grime from being lodged between layers, unlike Twin Air, this can be a problem with inferior two-piece designs. Trapped particles can restrict airflow. And, if dirt works it's way into your engine, a pinhead-sized granule will gouge your cylinder, piston and rings like a bullet.
"Very easy to replace, easy to wash and very durable. Used 2 of the Napa Power Sport air filters and both times when I got done riding and checked the air filter the next day before i rode, both of the air filters i bought were torn down the middle but the twin air air filters have not done this and Ive reused them several times now."