Braking offers the CM44 brake pads as a great replacement for your motorcycle's braking system or upgrade to a pad that offers great performance and an outstanding wear life. Braking designed the CM44 brake pads to offer a fantastic initial bite and consistent feel for amazing performance. Designed specifically for wet and muddy conditions the Braking CM44 rear brake pads are gentle on rotors due to their unique sintered-metal construction. Because of their design and unique construction, the Braking CM44 brake pads offer unmatched heat dissipation to further enhance racing performance. Includes two brake pads, enough for one caliper.
"The tool is well constructed and designed. I tried to bend my subframe and it wouldn't budge. I think the tool would have worked if my frame was bent in a different place. I think if your bars or subframe can be bent back, this is the tool to have due to the way it clamps onto your bike and the adjustabiltiy."
The Dunlop Rebate That Sticks!: From September 1st through December 31st, 2013, receive a mail-in rebate of up to $50 with the purchase of any Dunlop Geomax Tire (MX11, MX31, MX51FA, MX51, MX71)! With the purchase of 3 or 4 Dunlop Geomax Tires, also receive a set of 2 "Geomax" tire stickers per tire. *For additional details, terms and conditions, please see linked Dunlop Geomax Rebate Card. Geomax MX51 helps deliver enhanced grip, added tread longevity and a wider range of terrain applications, reaching farther into hard-pack conditions. Profile design provides more tread volume (greater land / sea ratio) in the shoulders for excellent cornering grip and a more open center-tread area for straight-line grip. Recessed biting edges in shoulder tread blocks yield enhanced traction for greater grip in corners and ruts throughout a wide range of terrain conditions. Tie-bar design connects and reinforces the tread blocks for greater tread stiffness, yielding improved intermediate-to-hard terrain performance. Recessed design in the area between tread blocks gives the tire improved compliance for enhanced ride comfort. Knobs are placed in a unique "cross-stitch" shoulder-block distribution for enhanced traction and grip in intermediate-to-hard riding conditions. Larger-radius tread block base for strength and enhanced tread longevity. Tire Specifications: Load / speed index: 62M. Recommended rim: 2.15". Overall diameter: 27.13". Overall width: 5.04". Full tread depth: 20/32". Maximum load (pounds) / PSI: N/A.
"I have used Bridgestone 403/404, Michelin S12, Michelin Starcoss, Kenda Southwick and Millville and this tire is it. I have 4 rides on rocky/sand track, loamy, and hard pack track and it still has lots of traction left. I was surprised and happy with how well it’s holding up. In addition, the traction has been excellent on the loam, it did well in the sand, and it well on hard pack. I ride in the NW West where the dirt is loamy and ripped and dries out by the last moto. I have been switching tires for the last two years trying to find the right one and I am staying with the MX51s."
2 of 2 people found this review helpful.
Share this Review:
HP TOOLS STANDARD REAR TUBE - 100-110/90-19
HP Tools Standard Tubes are a great way to upgrade or replace your existing motorcycle tubes with a quality tube that can handle the abuse that you can subject it to. HP Tools Standard Tubes have are constructed to have excellent puncture resistance for maximum durability. HP Tools Standard Tubes are made of a blend of natural and butyl rubber fox maximum performance and durability. Heavy duty valve stems are included making installation easy.
"The first ride with the power flow kit I immediately noticed a difference in the throttle response coming out of corners. I wished I would have bought the power flow kit when I first bought my bike. It was one of my last mods and it should have been one of my first."
Share this Review:
KENDA MILLVILLE K771 REAR TIRE 110/90-19 - STICKY
Note: Please check your current tire size to ensure you are ordering the correct replacement size. Designed to meet the famous "Millville" mixed terrain. The unique dual rotation tread pattern allows for a wide range of applications from "Millville's Gravity Cavity" loam to loose soil over hard base. Reinforced knob base for excellent durability. New factory style racing tread compound for high grip on soft surface with a hard base. New lightweight casing ply material for reduced unsprung weight. This product is not affiliated with or endorsed by Spring Creek MX Park in Millville, MN.
"First set of Kenda's and I am very pleased. I am using them on a track that is a mix of sand, ash, and loamy dirt with no clay and they get really good traction. I bet the Southwick tire is even better for sand/ash/loam. I plan on using theses tires early summer to mid summer when it the ground is still soft ( I am from the NW). The sticky compound seems to work real well especially on pavement. I have been getting really good starts with no spin on the pavement. The tire is directional too. One side is more for soft and it can be flipped for soft/int terrain. Look at Kenda's website for details. Tires I have used in the past are: Michelin S12 or Starcross. The S12 performed well for sans/ash/loam. But the Kenda works just as well and is a lot cheaper. I used Bridsgtone 404/403 last summer but plan to use Kenda this Summer."
Established in 1989, Works Connection continues to produce quality products for all your moto needs. CNCd and formed from aircraft-grade 6061 T-6 aluminum. Specific design and fit for each make and model. Covers to protect frame rails but does not extend beyond rails. Oil drain access hole pre-cut into the plate for easy oil changes without having to remove the skid plate. CNCd aluminum brackets with quality hardware for secure mounting. Note: Some models utilize stock mounting lugs. Made in the U.S.A.
"For the price the WC skid plate is very good product, all WC products seem to be good products. However, The skid plate was hard to get on my 2007 RMZ450 and didn't seem to fit perfectly when putting it on. Once I got the screws in and tighten It fit fine. You may need to trim your guards, I had too. It would have been nice if the foam was 3 to 4 inches longer too. You can always buy extra foam or deal with it which is what I did. For the price I will probably by a WC skid plate for my next bike."
Share this Review:
TWIN AIR BOX COVER
Covers air box while cleaning to keep water & debris out of your engine. Simply remove the seat & your air filter and install the Twin Air Air Box Cover. Molded plastic with rubber sealing edge for perfect fit.
"One Industries graphics are the way to go. I have tried FX and was not pleased. One is stronger and holds up better than FX; the adhesive seems to be stronger. For those that are thinking of staying stock your plastic is going to hate you, protect your bike and go with One Industries. The seat cover that came with it I am very pleased with too."
Silky smooth action is what you can expect from the Pro Circuit throttle tube thanks to the use of Teflon®. Pro Circuit coated the interior of their throttle tube with Teflon® to dramatically reduce friction that will last. Pro Circuit constructed the throttle tube with the CNC machining out of aluminum that provides superior strength. The Pro Circuit throttle tubes leaves out the guessing and matches the factory throttle pitch.
"The only other throttle tube I have tried is Works Connection. I would say they are equivalent. I do think it a necessary purchase. Your throttle will feel smoother than stock plus its way stronger than the stock plastic stock throttle tube. When grips are changed cleanup is easy with aluminum and no so easy with plastic."