KN XStream Series Motocross Air Filters take performance to the next level with the addition of a filter within the filters top in order to add even more filtration area for high air-flow and capacity. Each filter piece has pleated media which creates a large surface area that provides high airflow and great dirt holding capacity for extreme conditions. The two-piece design eases installation and removal on modern narrow-framed MX bikes. The epoxy-coated aluminum wire mesh, incorporated into a backfire screen, protects the filter element from harmful debris. A custom base seal ensures a precise and secure fit. KN air filters are washable and re-usable and they come pre-oiled and ready to use. Ideal for extended use in dirty and dusty off-road riding and provide clean carburetion even at high altitude. Pleated cotton filter allows for 2 to 3 times the filtration area of a foam filter, increasing filtration and air flow. Easy installation, changing and cleaning. Filter Specifications: Product style: Unique air filters. Filter material: Cotton gauze. Flanges: None. Height: 4.5 inches (114 mm). Weight: 1.5 pounds (0.7 kg).
ASV introduces the Rotator Clamp, a revolutionary new concept that protects your lever and perch from vertical impact damage. It replaces the stock half clamp on the back of your clutch master cylinder. When your perch / master cylinder does rotate out of harms way, you can simply move it back to the correct position with your hand! Features an integrated Nylon sleeve between the clamp and the handlebar that allows the master cylinder / clutch lever to rotate upon impact. Protects the lever and master cylinder from damage, even when fully tightened. Adjust the lever position without tools. CNC-machined from 6061 billet aluminum.
1-1/8" (28.6mm) diameter, aluminum alloy, taper-wall, braceless handlebar. Combines excellent strength with good resilience. This bar is particularly applicable where the lack of a crossbrace is of special importance. "Solid Mounts" bolt on top of stock 7/8" bar mounts, and adds 1/4" rise. "Rubber Mounts" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.
"the Turner mounts with the Renthal fat bars is a very good combo. the Turner mounts hold the bars very securley and are very strong. the fat bars with the Carmicheal bend raised the bars height and helped me feel much more comfortable when riding. im 6' 3'' and these bars height made my bike easier to ride. the Turner clamps are very good looking and the bars in black make the bike look like a factory bike."
5 of 5 people found this review helpful.
Share this Review:
RENTHAL R3 520 GOLD O-RING CHAIN 120 LINKS
Nitrile O-Rings extend chain life by retaining special vacuum injected grease inside the chain joint. Shot-peened alloy steel side plates for high tensile strength and maximum impact load resistance. High carbon alloy steel bearing pins for excellent resistance to wear. Gold colored side plates and copper colored rollers help prevent corrosion. Pre stretched to enhance performance of the chain.
December 31, 2007
"The renthal o-ring chain was a huge step up from my stock chain. It is much stronger and transfers the power much more effeciently. my stock chain had tons of side to side play and the renthal chain has lots of strength. the downside was that it was harder to put on because the chain has to be put together with the o-rings."