The Twin Air Air Filters design, high-quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined. Twin Air filters are designed to increase airflow while ensuring the highest level of protection from dirt / dust. Coarse open-pore foam catches airborne dirt, grime and sand. Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage. Exclusively formulated adhesive ensures glue seams will not break down. Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage. Fused outer and inner elements prevent dirt and grime from being lodged between layers, unlike Twin Air, this can be a problem with inferior two-piece designs. Trapped particles can restrict airflow. And, if dirt works its way into your engine, a pinhead-sized granule will gouge your cylinder, piston and rings like a bullet.
KN Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. KN Powersports Oil Filters are TUV product endorsed and TUV factory production monitored. KN cartridge oil filters trap harmful contaminants while the filters construction allows for high oil flow rates. KN Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturers recommended service intervals. KN Performance Motorcycle Oil Filters are constructed of resin-impregnated synthetic media, meaning high flow rate and outstanding filtration. When you push your motorcycle to its limits, take comfort in knowing the KN Performance Oil Filter is keeping up with your engine by allowing greater flow rate. Large, uniform pleated synthetic filter media provides high flow rates and outstanding filtration - traps 99% of harmful contaminants. KN has developed their performance oil filter to optimize efficiency with high end synthetic and synthetic blend oils. KN also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown. On many models, KN also incorporates a pressure (PSI) relief valve to prevent oil system damage. To prevent installation damage KN uses a rolled thread to avoid stripping. Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal. KN Limited Warranty. Filter Specifications: Product style: Oil filters. Anti drain back valve: No. Bypass valve: No. Filter material: High flow premium media. Gasket material: Nitrile rubber. Height: 3.813 inches (97 mm). Outside diameter: 2.219 inches (56 mm). PSI relief valve: No. Removal nut: No. Style: Cartridge. Thread specification: N/A. Inside diameter: 0.969 inches (25 mm). Weight: 0.4 pounds (0.18 kg).
MotoSport provides a dirt bike stand that is built with quality, exactly like the company itself! The MotoSport dirt bike stand is constructed out of steel, and powdercoated black for a nice looking and long lasting finish. A sweet looking injection-molded rubber top with molded-in "MotoSport" logos keeps your motorcycle in place while the drainage channels keep liquid from pooling. MotoSport is driven by riders and thus knew that adding a drainage hole in the center of the stand brings the status of this dirt bike stand from good to great. The sturdy base makes the MotoSport Steel Dirt Bike Stand able to support up to 350 pounds (158 Kg). Represent the company that has your back with the Motosport dirt bike stand. Dimensions: 17.45"H x 15.75"W (at base) x 15"D (at base) (44.32 x 40 x 38.1 cm). Weight: 7.95 pounds (3.58 Kg).
A familiar knee / shin guard with some innovative twists provides improved protection and comfort. TPR impact zones between knee / shin protectors. Top of the calf comfort cuff keeps the strap off of your skin for improved comfort. Full knee to shin coverage with hi-grade molded, Neoprene and foam materials. Sold in pairs.
Lightweight precision molded, poly carbonate shell with molded-in dome crests for increased structural integrity. Custom graphics with a high gloss, UV coated finish. On/Off air inlets and exhaust ports force cooling air through the shells interior. Snell 2010 and DOT approved, weight: 3.15lbs/1.43kg
The 2013 MSR Axxis Combo includes one each of the following: The 2013 MSR Axxis Jersey: Poly knit V-neck collar and heat transfer size label. Rib knit elastic micro cuffs. Generous raglan cut promotes air flow and increased mobility. Lightweight 100% spun-poly construction. Extra long tail. The 2013 MSR Axxis Pants: Sublimated graphic throughout. Ratchet style belt closure. Comfortable mesh liner. Spandex articulated knee panels. 900 Denier heavy-duty poly inside knee panels. Rubber thigh and knee logos. The 2013 MSR Axxis Gloves: Stretch poly and Spandex fabrics for backhand and finger panels, with printed graphics and rubber logos. Lycra stretch panels on sides of fingers for optimum flexibility. Synthetic palm and thumb panel for wear resistance and comfort. Palm side hook-and-loop wrist closure for bind-free flexibility.
Polisport is proud to present Durable Gloss Polypropylene (DGP), the first plastic composition for off-road that incorporates maximum gloss and high resistance to breaking. Injection-molded, quality Side Panels with a perfect O.E.M. type fit and plenty of space for sponsor decals. Exact replica of stock O.E.M. plastic side panels but stronger. Inexpensive alternative to O.E.M. replacement parts.
"I think the black Polisport side panels I ordered accent my Team Suzuki Yoshimura Graphic kit perfectly! I highly suggest that if you're in between ordering new plastics to go with Polisport! Thank you Motosport!"