Bolt on the Boyesen Quick Shot 2 Accelerator Pump Cover for the missing link your high performance dirt bike or ATV is missing. The Boyesen Quick Shot 2 will boost the fuel capacity into your carburetor by 25% over stock. The boost in fuel by the Quick Shot 2 eliminates hesitation and bog when getting on the throttle. Boyesen engineered the Quick Shot 2 Accelerator Pump Cover with a high volume check valve. An important feature is the accelerated fuel delivery that only the Quick Shot 2 can handle. Improvement on the bottom end will be a noticeable advantage the Quick Shot 2 will give. Running your bike to the limits adds heat which can cause stalling, but the Boyesen Quick Shot 2 will reduce the chances of a hot engine stall. Boyesen designed the Quick Shot 2 so it will fit all FCR Keihin carburetors. The 2007 Honda CRF model houses a high volume check valve that manages fuel through a cartridge design for high sensitivity and instant acceleration.
"Installed on my 2011 WR450 and my sons 2006 YZ250F. Must do as instructions say and replace O-ring on older bikes. Once you get to the bolts that attach the bowl to the carburetor the installation is easy. Re-jetting not necessary, but proper jetting overall is a must. It helps with hot starting and does smooth out throttle response. Hard to tell how much performance increases. Based on easier starting and better throttle response it is worth the cost."
Having won more off road championships than all other models combined, TM Designworks shows the incredible durability of their indestructible rear Chain Slide-n-Guide. TM Designs constructed the rear Chain Slide-n-Guide with an oil impregnated wear pad for maximum performance and wear characteristics. The replacement wear pad extends the life of the Chain Slide-n-Guide. TM Designworks constructed the Chain Slide-n-Guide to accept any O-ring chain, and the ability to accept up to 3 sizes over on the sprocket. TM Designworks offers a 1 year free replacement warranty on breakage for the Chain Slide-n-Guide.
The perfect blend of off-road toughness and motocross flexibility. The Impact glove features reinforced panels in all high wear areas and a serious dose of knuckle and finger coverage to ensure you go the distance. With a full silicone print on the reinforced and lightly padded Clarino palm, the impact glove will keep you in control no matter how long the ride. TPR hook and loop wrist closure system on an airprene wrist cuff. Dimple mesh construction for airflow and mobility. Full silicone print on a reinforced Clarino palm with padding in high abrasion areas. Tacky silicone print on the fingertips for added lever control. Direct inject TPRs on all fingers provides large coverage for varying riding conditions. Encompassing knuckle protection provides additional security. Constructed with a pre-curved design for an advanced fit.
The Twin Air Air Filter's design, high-quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined. Twin Air filters are designed to increase airflow while ensuring the highest level of protection from dirt / dust. Coarse open-pore foam catches airborne dirt, grime and sand. Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage. Exclusively formulated adhesive ensures glue seams will not break down. Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage. Fused outer and inner elements prevent dirt and grime from being lodged between layers, unlike Twin Air, this can be a problem with inferior two-piece designs. Trapped particles can restrict airflow. And, if dirt works it's way into your engine, a pinhead-sized granule will gouge your cylinder, piston and rings like a bullet.